Hello,
I have a 2019 Ford Fusion SE 1.5l ecoboost engine. I have been getting the shift system fault and looks like I need the bushing replacement. Ford quoted me 240$ to change them which is 14$ parts and 226$ labor. I tried to find a video which shows how I can do it but my main issue is access. My hands are not small or flexible enough for the small opening.
I am planning to take out the Engine Air filter box and see if that gives me enough space. Do you think this is a good approach or I should try any other approach?
Thank you
Was doing front struts my son's 2014 SE. Easy job, done them many times on other vehicles. Passenger side as I was releasing top bolt to knuckle like jumped out at me as if it were spring loaded Tried to push the top of the knuckle and pivot it back up as you should be able to do (it should move freely when swinging up and down), but nothing. The wheel assembly (brakes, rotor etc) will not swing up now for me to be able to bolt strut to knuckled. Its almost like the CV popped completely out and now we're hitting a wall. Weirdest thing I've ever experienced when doin struts. even had bottom of control arm supported with a jack
so we decided to cut the inner boot against tranny and remove the CV to see if maybe we goofed something. at that inside end of that cv are three wheels that go inside the cup. They will not go back in cup. any ideas? I've got two other close friends who also do lots of mechanic work dumbfounded by this as well.
Hello all,
i have a 2010 fusion with the 3.0 and I'm trying to get my ac running before it gets hot here. My cousin said the ac ran fine but it has not come on since i had the car. i had to put in a new pcm due to the major issue of them failing. I plug my AUTEL MK808 in and i can see it is requesting but the command state is off. all the fuses are good, new lines, new pressure switch (near firewall behind manifold on pressure line). I'm taking it in on the first of may to a reliable mechanic but if i can save money, any help will be appreciated. im at a loss and i direly need it also considering i have leather seats
Please help someone, I have a 2012 fusion with the v6. The ac will blow cold all day long AS LONG AS ITS IN PARK, the second you pull it out of park it's starts blowing. Put it back in park ac comes back on. I know it sounds crazy but I'm lost and it's my wife's car and she hauls out three kids around and it gets very hot in Oklahoma. Any tips or advice is greatly appreciated.
~Steve
I am a 2013 Ford Fusion SE and I'm trying to install a 1080p rear view backup camera. The card does not currently have any backup cameras. Is it possible to by the bezel with the camera that comes installed in it and replace it with a better camera? I guess I'm asking what my options are.
2013 Ford Fusion SE.
I'm looking to replace the mic for a better one. What ones exist that I can install where the current mic is with better sound quality?
Have a 2007 fusion se
4cyl..
On the dash above radio is 3 buttons..info...settings
.reset...these buttons do nothing at all..
My speedometer is lit and working..
Is this a common thing that I can not get buttons to show oil,,or mpg readings..how can I fix
Even though the arbitration was in January this year, Ford has not replaced the dash. Ford is impossible to reach. In the meantime, like everyone else with this problem, I am driving with a car with a defective passenger air bag. As I mentioned earlier, a Ford engineer admitted that the airbag would not deploy properly.