shawshank95

I have unhooked everything and tested the lines with nothing installed. I have also checked all the ballast and bulbs to make sure they weren't the problem. I did that by hooking things up on the driver's side and all is good. I plan on getting this issue resolved and then installing the harness. I am pretty sure I won't have any issues with the harness. The flickering only happened for a couple of days and now there is no light on the passenger side only. Just wasn't sure if the sjb can be reset.

ok so I have a 2010 Fusion Sport. I installed my HID lights about a week ago and love them. I did the 35w kits from ddmtuning. I put the 5k in the low beams and the 3k in the fogs. Love the look of it. Everything was working fine for a few days. Driver side works great. The passenger side started flickering just on start up for a couple of days and now it won't come on at all. I have checked voltage at the driver's side which works fine and it is around 14.5. The voltage at the passenger side plug is 11.5. All fuses are fine and looks like I have traced it back to the smart junction box. Does anyone have a solution for this problem or does anyone know how to reset the sjb. Please help!!!!!! Have been dealing with this for over a week now.