vertmustang98gt

I'm debating on buying a CAI now. I just installed the magnaflow and have the mod bug.

Anyone who has installed a CAI on their Fusion notice a difference in exhaust tone? Deeper, throatier, etc. Thanks for the help. On Mustangs it usually is deeper but that's a v8 I'm referencing. I've never installed a CAI on an i4.

After reading this whole thread, I had to say this. The bare bones Fusion is the S, not the SE lol.

http://www.fordfusionforum.com/index.php?/topic/8794-magnaflow-exhaust-added-16675/

I don't know if anyone has helped you but low beam head lights are bulbs H11 and fog lights are H11 also. I'd highly recommend www.DDMtuning.com. I've never had a problem with them and I've bought four sets from them. My only issue with them is sometimes the shipping takes over a week.

I might not be the first person to do this, but I'm the only 4cyl Fusion on YouTube I believe with a dual exhaust. In my opinion, it sounds decent. You be the judge. I had to do a few modifications, nothing crazy though. Exhaust wise, all it takes is removing the bolt that holds the clamp and removing the exhaust (4 hangers). The new exhaust utilizes 5 hangers, which the one hanger is already on the driver side stock (production part). So the only modification I truly did was trim the rear valiance. I have a picture of it below and couple rear end shots. It turned out well. Modification of Rear Valiance http://i129.photobuc...n98GT/Rear5.jpg Before Exhaust was Installed http://i129.photobuc...GT/RearEnd4.jpg Without Valiance (surprisingly doesn't look bad) http://i129.photobuc...GT/RearEnd3.jpg Finished Product http://i129.photobuc...8GT/RearEnd.jpg

I've looked everywhere, did not find anyone running the dual exhaust #16675 Magnaflow setup on a 4cyl. I will be putting the exhaust on my Fusion next Thursday. Will put a video up soon after, hopefully it doesn't sound bad. I'm thinking that could be why no one has a video up, but it also could be because the "labor" that is involved. Also if you have an ultrasonic knife, cutting the current valiance is zero problem. I'll take pictures and videos as I stated above. Stay tuned.

After powder coating the wheels on my Fusion, I went back to the same outfit for my new 2013 5.0. I couldn't get another color, I felt like this color combination can't be beat. What do you think? http://i129.photobucket.com/albums/p235/MustangTeen98GT/Fusion2-1.jpg http://i129.photobuc...Teen98GT/50.jpg Now the question is when do I get to drive all my vehicles???

Wish you guys were in Ohio, I've been wanting to paint my front grille black to offset the dumb stock chrome look. I might have to man up and do it myself I guess.

I've been looking into aftermarket systems myself, all I want is an all touchscreen HU and keep the SYNC on my steering wheel. I have zero clue when it comes to audio though so I'd have to pay someone to do it, but I don't want to get ra*** on a price quote. Any ideas on HU? I don't want to get sold the $1,000 one when a $200-500 would do the trick. Thanks.

They fix the issue with the FFC? Because I'm trying to join the forum also.

Or you don't remove anything and you find a friend with small hands. Did this on the 2011 I owned (the dealer installed them on my 2012 so they did the proper way). The sig picture was actually taken when they were switching HID's from my old car to my new one.

I see what you did there, clever you are!

Wherever all of you guys live where they pull people over for tail light tint, wrong turn signal colored lights, etc. I'm glad I live in Ohio!