Hey all,
I'm looking for some info about how to flush the transmission fluid, and what type of fluid to put in and how much.
Car is a 2010 Fusion SE 4 cylinder automatic.
As far as methods, Ive heard of people only dropping the transmission pan, or syphoning fluid out of the dipstick and getting about 3 quarts. I'd prefer not to do this method as it seems like its not the best way to change the fluid as you leave a good 3-4 quarts of old fluid in the system.
I've done a flush on the old car, a 2001 Mazda 626 v6 auto. I tapped into the transmission fluid line, cut it apart and ran an extended hose into a bucket full of fresh fluid for the intake line, and ran the output line to an empty bucket. Started the car and let it idle till the fluid coming out the output line looked fresh and clean , shut it down and put the lines back together and topped the fluid off through the dipstick.
Can anyone tell me if this is a reasonable approach for the fusion? Is there a transmission filter, and if so where is it and where can I find a replacement?
How about fluid? What type and how many quarts? I read about 7 quarts but not sure if thats for the 4 or 6 cyl.
Thanks for any help in advance!