OK please help if you can. My wife has a 2007 fusion w/ 3.0 V-6 ( 63000 miles) She gets home and 2 hrs late I take her car to go drop off movies (it was raining) The car boggs down wont even go 10 mph.
I go to Auto shack to borrow their scanner. (yeh engin light came on) I got the code PO353 third cylindar coil, first/secondary . I'm not up on all the computer stuff (and probably should have a professional do this but I don't have the cash. So I researched on line and went thorough the following steps.
1. I replaced that plug. (still missfiring)
2 Replaced all the plugs. (Still misfiring but not as bad about 85% of where the car should be)
3 replace coil pack for no3 Cyl. ( Still nothing)
4 switched new coil pack to another cyl to make sure it worked (Yes it did)
5 pulled connectors one at a time from front bank coils to see difference in rpm change (all three worked)
6. Was able to reach underneath intake and pull connector on number 3 coil pack (no change plugged or unplugged. still missing.
cylindar order firewall
1-2-3
4-5-6
radiator
I have no idea at this point nor do I have the tools to go any further. I take it to a shop and they tell me what I already know except for this They tell me the firing order is
1-3-5
2-4-6
Ok that would explain that I changed the wrong coil pack but it doesn't explain why i didn't get spack from (what I thought was number 3 coil)
HELP!!!! Is my firing order right or his? He said that was the order ghe got from his scanner. but I haven't been able to fing anything online to corroborate this........