MikeD2

Hi, I have a 2011 Mercury Milan V6 and a 2016 Fusion Titanium. I have been driving the Fusion more often than the Milan. When I drive the Milan it seems I have to put more pressure on the Brake Petal to slow the car down. With the Fusion as soon as I apply the slightest pressure on the Brake Petal it begins to slow down. The Brakes and Rotors have been replaced on the Milan during the past 2 years, there is no air in the brake system. The car only gets about 7K miles per year (my Wife drives it). I was just wondering, is there anyway to make the Brake Petal more sensitive? I have driven a car with a bad Power Brake Booster, I don't think it is that. BTW, the car stops fine on full pressure stops. It is just when slowing down gradually that (I think) is a problem. Thanks for reading.

I just tried the "Tip" today, I cleared the code myself. I will post the results but it may take a few weeks. I cleared the code twice before, it took a couple of weeks for the check engine light to come back on but at those times I did nothing else but erase the code. The gentlemen who filmed the tip is very knowledgeable and has many useful tips on youtube. BTW, Merry Christmas everyone!!