Tramain_C

The front wheels are 19x8.5 The back wheels are 19x9.5 Bolt pattern is 5x112 , was wondering if these will fit the car and if they do with adapters that change 5x112 to 5x114 work

Sounds good ! Thanks man

I have a 2007 2.3L se with stock 16" wheels and I'm interested in buying these set of 4 17" stock wheels that I believe come on mostly v6 2008 models, 225/50/17 I think are the wheels specs, will these fit on my car? And will they fit with my lug nuts off my 16" wheels?

I replaced my stock license plate bulbs with the Sylvania LED bulbs that they sell at auto zone and they worked fine for a few months then one started dimming so I replaced both as a pair, these worked fine but then one night I noticed one would stay on while the other was off, then would come back on with the other went off until they ultimately both would go off and come back on at random over and over. The sockets they are in have no corrosion, rust or anything of that nature, they're perfect, so I'm not sure what's going on, no other lights on or in my car have this problem. What can I do to resolve this issue? Is there a fix, or just go back to stock bulbs and it'll all be back to normal?

I have a 2007 fusion 4cyl and want to know which springs to go with to lower it, I hate the natural stock look of the car being lower in the front and high in the back, which springs would give me a decent drop with a leveled out look? I have the stock 16" inch wheels on it so not ultra low to where it while rub on those tires. Also car has 74,000 miles so would I need to change shocks/struts before? Or will I not need them changed? Thanks

They came in a week later, as I said didn't have to remove the bumper at all or even close, they just pop right out.

Bummer -.- I like the design of those but what about these, specs or not listed just bolt pattern http://tampa.craigslist.org/hil/pts/4268138955.html

Was thinking about getting a set of these 20" rims for my 07 4 cyl fusion, will they fit with no modification to suspension? If so will brakes need to upgraded? http://m.ebay.com/itm/251426984465?nav=SEARCH&sbk=1

Ok thanks for the explanation, the SJB is just the biggest worry part for me, I'm having new headlight assemblies installed as we speak along with h11 bulbs that came in them from the ford dealership. I'm keeping those stock until I can afford a retrofit and find a custom shop that is capable of putting it together but there's a shop that sells hids in bye area that is pretty reputable with there hid kits so later today I plan on having them install hids in fogs with no relay now that I know they won't effect the SJB or fry the factory wiring, put the retrofit headlights will be the morimoto kit for sure

I was told fogs are not connected to the SJB, so do I need relays for these? Or was I told false information

Can I get 35W?

in that case, my fogs are projectors can i run hids in those with no problems with SJB??

so retrofitting projectors eliminates wiring up a morimoto hid kit?

Again

Still with or without projectors , you still need a hid kit which was my question, which to get that won't flicker and screw up my SJB