KelleyHMFR1982

i didn't put any oil in the transmission. I put oil in the engine, lol. well technically transmission fluid is a hydraulic fluid which is oil but no, engine oil. I used motorcraft 520

I used motorcarft syn blend 5/20w. I checked the level and all is well. the noise is more like a ringing. its kind of hard to explain. also, the manual said 5.5 quarts of oil for. is that correct? that's also the amount I put in. any brands that might work better? i'd rather just use reg oil but since i'm new to a fusion and this forum, i'd thought i'd ask. any recommended reg oil brands? I've always used Castrol in my vehicles before hand. I also know that Pennzoil is suppose to be pretty good convential

also, what type do you use? synthetic, regular, syn blend?

Hello there!! I am a recently new fusion owner and new to this forum. i'm not sure this question has been answered but i'm going to ask anyways. i just did my first fusion oil change. it is a 2010 SE 2.5 auto, has about 48000 miles on it. being the type of person i am, i chose motorcraft syn blend and a motor craft oil filter. after changing my oil, the engine was noticeable louder. im not sure if its me or if the oil did something to it. when i purchased it from the dealership, there was an oil change sticker that said it used Castrol. the engine was more quiet then. i live in central texas and having 5/20 seems not enough protection for this heat. so, what kind of oil and filters do you guys use, any noise from engine after oil change, could you use 5/30 and be ok? thanks for you help ahead of time