Hammerdown

Where did u get all the stuff for the engine cover?

I used a hair dryer with no problems. Didn't even have to use goo gone. Their was no residue at all.

Cool! Thanks for the heads up!

not sure. my buddy owns Sommers Sound Systems in Florida and posted this on his fb page.

Yeah how much?

I would also like more info on this. I installed a hidden hitch on our 08 fusion but just hauled a flat rack to haul more luggage for a trip. But I would like to put a hitch on my '10 sport. I was wondering if I could pull my trailer with a quad on it. The quad is only 480lbs. So how do i figure out the tongue weight? On the 08 the tongue weight for the hitch was 100lbs. but the manual said no towing. But I only hauled with it. I went riding yesterday and seen an 08 hauling a wheeler so I guess it can be done. But how?

Had the same lack of power problem on my 2010 fusion sport also. After 4 different rips to the dealer and 100 miles more on the car for them to duplicate it to no avail. Then finally they told us to not shut the car off and bring it in. Told me it was a faulty installed mass air flow sensor.

Well i got my hitch installed and it wasn't as bad as i thought. I ordered it off of etrailer.com for 147 bucks and the dealer wanted 300 installed so i saved 150 bucks,well worth it. The only problem i had was that the bolts they sent to go inside the bumper tube were too long so i ran to the local hardware store and got a shorter one. The other thing i would recommend is when u get the bolt to the hole on the inside of the bumper, use a little telescopic magnet to help get in the hole, it helped me greatly. :happy feet:

That would be cool if you could post some pics, im about to install one myself. Thanks for your help. :happy feet: