gtppilot
Fusion Member-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by gtppilot
-
Never mind. My bad for not searching around a bit. http://www.fordfusionclub.com/index.php?topic=129886.0
-
Did you ever figure this one out ? This morning I lifted the whole knob assembly right off the shaft unitentionally. It was always loose feeling as in you could rotate it a few degrees back and forth, but this caught me by surprise. I agree, I don't see any missing fasteners. Has to be some kind of spring loaded clip or something. Will have to dig around tonight. Fortunately, I was able to drop it back on with a little wiggling around. Weird and Annoying.
-
Duplicate from another thread. If you are looking for a decent all around all season tire, take a look at Fuzion HRi tires. Made by bridgestone I believer. I had them on my last car and as far as bang for the buck goes, they were awesome. For my fusion I have gone the winter tire on steel wheel and will be getting summer tires on nice alloys, however, in the future I would not hesitate to do the Fuzion's again.
-
If you are looking for a decent all around all season tire, take a look at Fuzion HRi tires. Made by bridgestone I believer. I had them on my last car and as far as bang for the buck goes, they were awesome. For my fusion I have gone the winter tire on steel wheel and will be getting summer tires on nice alloys, however, in the future I would not hesitate to do the Fuzion's again.
-
I have had this issue with every car I have owned. Electric windows are obviously worse because they only provide so much power and often won't be enough to break the ice. Nothing is as bad as the 83 Nissan Sentra I had. Manual windows and door locks. The locks would freeze up while driving and then I would have to use channel locks to hammer the lock up and down til I could get out. Made for some funny date stories when I would go to drop my girlfriend off and she wouldn't be able to get out.
-
Well, at least Ford seems to be doing something right. I was never really a big Ford fan, but cars like the fusion kind of changed my mind. I don't really consider myself brand loyal at all anymore in fact. I would like to think that maybe Ford is surviving because they are building decent quality cars that people actually WANT to buy. Heck, if I wanted to buy a Toyota just because of their reputation for quality it would be tough. Can't say I want to drive anything they offer. http://news.yahoo.com/s/ap/20081202/ap_on_.../autos_congress http://biz.yahoo.com/ap/081202/wall_street.html
-
I love that! Can you buy single bars, or do you have to take apart another stock grille, etc., ? Sweet!
-
Emissions light
gtppilot replied to Kirbster's topic in Maintenance, Recalls and TSB (Technical Service Bulletins)
Yeah. Figured it would be the easiest place to start. Some cars will set the light if gas cap is loose. It is emissions related. I do not know that the fusion has the capability or how long it would take to set. I do think that it would take some time to set the light if loose. I'm just guessing, but it's possible it is based on pressure, positive or negative, changing in the tank over a period of time. If you know someone with a code reader, or stop at a parts store with one, it would be interesting to see the stored code that tripped the light. -
Emissions light
gtppilot replied to Kirbster's topic in Maintenance, Recalls and TSB (Technical Service Bulletins)
Loose gas cap ? -
The official ford photo and specs are out
gtppilot replied to turbo taylor's topic in Articles, News & Reviews
That's going to be tough for me to get used to. I really like the grille and headlights on the current car and have since the first time I saw it. This new styling makes me cringe for some reason. That grille.... Like anything though it may just take some getting used to. It will be interesting to see the entire car. -
Ford Fusion / Mazda 6 platform?
gtppilot replied to eighthwall's topic in General Powertrain Discussion
Hope this information helps. Good luck. :beerchug: >>>>>>>>>>>>>>>>>>>>> Indeed it does. I really appreciate the clarification and the detailed explanation. Good Stuff! Thanks for your help !! -
Ford Fusion / Mazda 6 platform?
gtppilot replied to eighthwall's topic in General Powertrain Discussion
Hold on a second. At the end of the automobilemag article it talks about the L position being a performance shift mode kind of thing ? I apologize if I just didn't read the manual enough but is this true ? I thought L was just a low gear mode for slippery conditions etc.,. I'd be interested in hearing what others experiences are with this. -
On long trips I get about 27mpg if I keep the speed between 65 and 70. I average about 21 and change during my normal commuting which is mostly highway driving. Speeds vary but I stick with the fast moving traffic if there is any. I do drive pretty aggressively most of the time. My mpg numbers are from the display. I have not calculated a reality check on it.
-
GE Nighthawk
gtppilot replied to QuoVadis69's topic in Glass, Headlights, Fog lamps, Lenses & Window Tint
Great info !! Thanks !! -
GE Nighthawk
gtppilot replied to QuoVadis69's topic in Glass, Headlights, Fog lamps, Lenses & Window Tint
I really like the Sylvania Silverstars I have used in my Grand Prix. Will be putting in them my fusion when the time comes. -
http://www.autoweek.com/apps/pbcs.dll/arti...29988/1532/FREE
-
That is the PIE site, however, it states you need to be a dealer/distributor to order one directly from there. Not true ?
-
I don't have one yet, but this looks like the one: http://www.crutchfield.com/app/product/ite...i.e.&tp=120
-
I assume you mean How did it break like that ? Not sure. It was like that when I got the car. I suspect a kid or someone very impatient really yanked on the handle causing the handle to fail right where the return spring rests against it. Maybe there was a defect in the plastic as well. I have read other messages stating the exact same failure.
-
If you decide you want to tackle it yourself it's not too bad a job if you have everything you need. Hope this helps !! http://www.flickr.com/photos/gtppilot/sets...57607539089979/
-
I've been eyeing the H&R Sport Suspension. Looks like the ride height can be adjusted which might be worth considering. I'm also on the fence about it. Around here in CT I kind of like having the extra ride height due to bad roads and too many SUV's. I like the wheels!
-
Hi BBF, I just picked up a used 2006 Fusion SE. Love the car. Scary, but my only real complaint is a broken rear door handle. In addition to ordering the handle, are their any clips or anything I should order just in case ? I would prefer to not have the door panel rattle or anything due to broken clips or something that hold it to the door. Is it literally just the chrome handle you replace ? or part of a larger assembly ? Hard to tell from the cheesy sketch from Ford Parts online. I appreciate your help !! Chris Dark Blue '06 Fusion SE P.S. If it would help the forum I could take pics as I do it and we could make some kind of a DIY post.