Marlin

Cylinder 4 has spark and fuel. When I pull the coil pack out of cylinder 4 while running nothing happens but when I pull it out of 5 or 6 it will bog down a little bit. Checked the fuel injectors and they all tested out around 10.9 or 11 ohms.

These are pics from now. The same thing happened 6 months ago.

Hey all, I have a 07 fusion with digital fan speed control that would work when the wires were moved around down there. Shortly after it stopped working all together. I replaced my resistor, pigtail, and blower motor about 6 months ago after the same thing happened. This time around it seems to soon for the same problem. Any ideas on what else could be going wrong? I was reading other posts and thought I could have wired the pigtail in wrong. These pics are what burnt out.