dequardo

Not sure. With covers?

Cluster is relatively easy to remove. First pull with both hands at the bottom of the radio bezel surround. Free up the bottom clips, then the sides, and finally the top. Careful on the top to pull straight out not UP so as to not break the clips. Disconnect the 2 or 3 electrical connectors then place the bezel aside. Two screws on the outer edges of the where the panel you removed just was. Be VERY careful if you then remove the storage bin and connected ducts. It is VERY difficult to get this back into alignment properly. Trust me on that! Good luck.

Where the bottom of the A-pillar meets the dash?

I have the SAP package and need a set of either 16's (preferred) or 17" wheels for winter. Tires would be a plus. LMK, thanks!

I have the OEM 225/45/18s from the SAP package and need to get a set of winter tires/wheels. I assume 16" is the way to go but can I get guidance as to best tires size to properly match to the OEM 18s overall circumference? Also advice as to where to get the TPMS's I'll need? Thanks much! Mike