Brewer7094

I got everything installed, wasn’t hard, well the lights turn on with the key regardless, but will not shut off when it’s daylight. I have the wire from pin 46 ran to one of the middle wires on the harness on the load sensor, and the ground ran to the outside wire of the harness and grounded to the bracket next to the plug with a bolt to make good connection. With a test light I’m getting power to the harness, while the lights are on, idk what I should do. Do I have to change something in FORScan or what. parts I used- harness wpt 1013 sensor-DG9Z-13A018-E switch- SW-6658