Jump to content

Fusion Fan 200

Fusion Member
  • Posts

    13
  • Joined

  • Last visited

Profile Information

  • Region
    U.S. Mountain
  • My Fusion
    2014

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Fusion Fan 200's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Try a software called www.forscan.org its diagnostic software for ford Lincoln and mercury
  2. 2014 Fusion with factory rear parking sensors I have forscan paid version with the elm obd11 connector . I use it to check for dtc's and there were non I ran a test on the MODULE it came back fine . When u put it in reverse a message pops up asking if u want to turn it off or on . It will no longer let me turn it on . Any ides would help a bunch and thank you in advance .
  3. Have u checked the spark plug in the cylinder or fuel injector ?
  4. Your engine is a sealed unit with a vacuum so when u take off the oil cap its sucking air through like if you would if u only opened one window you get that fluttering sound..
  5. I cant find a timing belt replacement diagrams or step by step instructions for a 1.5 . Thank You very much for the website .
  6. 859,428 miles 2014 Fusion SE Original Engine and Transmission. The only things I have replaced are brakes rotors air filters oil and filter when the car tells me to change it trans fluid every 50,000 miles synthetic and tires. I have a lifetime alignment from Firestone which was 179.99 plus tax. which has paid for itself 10 times over. My State requires a inspection every year and its always passed .I make sure I take to a place that will tell me if somethings wrong so I can fix it my self .
  7. looking for a silver 2014 fusion hood in West Virginia .
  8. Could be anything from a short in the wiring to a bad temp sensor to a bad module or just dirty connectors with moisture in the connectors or even a bad relay or fuse under the hood in the fuse box or you r cooling fan might no be working
  9. Make sure you do a battery reset to let the car know it has a new battery in it .
  10. Try using forscan at www.forscan,org It has good diagnostics to read dtc's that the regular scanners cant pick up you can also test different modules . You will also need a elm 327 obd11 connector with medium speed and high speed switch you can buy at Amazon to use on a laptop the usb ones work the best in my option. I use it on my 2014 and friends coworkers fords Lincoln and mercury automobiles and they love it.. forscan also has a forum .. You can turn off seat belt reminders day time running lamps on certain vehicles Depends on the vehicle u can turn certain things on and off .. Make sure you do your research before attempting to change anything ..
  11. These fusion are specific about what cranking amp to use If u buy a new battery you have to due a battery reset to let the car know there is a new battery. The car cant determined between a old and new battery. You can do this with forscan and in forscan u can choose what cranking amp your battery is thats in the car . Advance Auto Parts,Autozone or Oreillys use to be able to check your starter and alternator while still on your car I dont know if they still can or not it worth calling and asking .
  12. 2014 Fusion with factory rear parking sensors I have for scan paid version with the elm obd11 connector . I use it to check for dtc's and there were non I ran a test on the module it came back fine . When u put it in reverse a message pops up asking if u want to turn it off or on . It will no longer let me turn it on . Any ides would help a bunch and thank you in advance .
  13. I would file a complaint with the attorney generals office . It helped me once and the attorney general in my state was able to get me my money back . I dont know if it would help u or not .
×
×
  • Create New...