BrettJohn

I replaced my Fusion interior lights with AUXITO LED number "194 168 CANBUS Error Free". Very pleased with the light these LEDs put out. They work in every socket even though the original bulbs are of a different wattage at each location. They are polarity sensitive, so if they don't turn on the first time just extract and flip them over. They are much brighter than the OEM bulbs, they dim beautifully when the interior lights go on auto off, and the cool white light makes the car look newer than it is. https://www.auxito.com/collections/2006-2012-ford-fusion-parts-replacement-upgrade

FOG light improvement is just unreal! I bought AUXITO H11 LED fog light bulbs because I put them on another vehicle about two years ago and they have been going strong. It is a big upgrade in lightning performance and color wise. INSTALL: The passenger side had pretty easy access to twist and remove the old light with the pigtail attached. The drivers side you can do too but, you'll need to slightly pull on the top of the License plate holder (right side or pax side) enough to allow your left hand, wrist and arm to snake its way over to the back of the drivers side fog light. That is the only way to get there unless you start taking stuff apart. Next, slowly twist out the old light, put in in the new LED and you're off. The improvement is fantastic. I cleaned up my lenses as they were hazy. If your lenses are cloudy/hazy take some 240 wet/dry grit sand paper and sand them real good (i used water--wet sand). Next, take some 400 grit and sand them real good. Next, take some 800 grit and sand them real smooth. Next take some 3M rubbing compound to them and polish them till you cant see any scratches. Next, grab any brand of headlight renewal/restoration and polish it some more. It should look almost brand new. If you want to preserve that clear look either put a good coat of wax on it or spray the surface with the headlight coating until evenly and thoroughly coated.

I bought these Auxito bulbs for my 2012 Ford Fusion LED map light retrofit. I took my time and paid attention to orientations, etc. The instructions that come with the led replacements are also very good. You have to make sure you have the right instruction set (all the instructions for the different replacement types are in the book) and it was a good idea do the test first before installing. As someone who has never changed car lightbulbs before, I thought this was easy and the lights are much brighter and I'm extremely pleased overall.

Just installed These AUXITO bulbs in my 2013 Fusion and was immediately impressed. They aren't adjustable for depth in the housing as some are, but they seem to be perfectly positioned depth wise already. The rotational adjustment to get the bulb "clocked" just right is a straight forward ratcheting type that is positive but still easy to use. These bulbs are very bright and more focused than any other LED brand I've tried. I did have to lower my headlight aim slightly out of courtesy for other drivers. See the comparsion on the pic. (The left side is halos and the right side is LEDs) I've had them installed for a month now, so I can't attest to longevity yet.

Hey all! Thanks for your time. Last day or so the normal cranks for my car to start have slowed. No ticking, just slower, but normal starting sounds. I have had batteries go and that is more "crank" sounds, not slower crank sounds, with this car. I am thinking starter? Auto shop was too many decades ago to remember if it is starter or alternator. Kinda want an idea before I walk into a shop, so any help is appreciated! Again, thank you for your time!