Mr Maintenance

I went back and turned the screw part open until I saw the O ring come out of the valve. That is how I should have done it the first time. Thank you for this article, it was very helpful (except for how far to turn the valve open). Mr. Maintenance

Thanks for writing this up, but I'm still having problems: #6, I used the PB blaster, the bleeder valve opened much further (started at 1/8 turn, maybe a half turn now?). Our 2012 fusion 2.5 never has any fluid come out of the bleeder valve, and the air is not getting out of the system. Where is the air and fluid supposed to come out of the bleeder valve? From the screwdriver slot? From somewhere else? Thanks in advance, Mr Maintenance