enfuego

It would need modifications to fit around the rear diff. Also I am making high quality affordable systems as an alternative to the over priced magnaflow kits

Hey guys if you would like to buy one send me an email at jamesonmarshall@gmail.com and I will send you an invoice via gmail also the kit will enclude a cutter so you will be able to from start to finish do this job easy in you driveway no jack required in a half hour or less

I am working a v6 setup. Mostly my kits will be from the rear axle back do to the fact that there is no performance gains to be had from going further forward. Also this help keep the price down.

I'm sorry I forget to mention it picked up a mile or 2 per gallon however it also had more umph lol

Normally it has a nice growl in life it sounds very much like the magnaflow . Yes you have to cut the pipe however the kit comes with a nice stainless bad clamp and I'm working on a deal for exhaust pipe cutters so you can do it at home in ten min also it will come with a template of where to cut .

here is the link for the video clip taken from my cell phone so the audio isnt great it sounds more high pitched than actually is also i can use a turbo muffler to make it even quieter if desired. also it was just loose on the car http://www.youtube.com/watch?v=dloyd8LJfn4

If anyone knows how to get the pictures from an android phone on here aswell as a video clip it would be very helpful thanks. My laptop died so at the moment its all I have. Also if you send me a message I can send them as sms messages if that helps. Thanks all .

Ok first off the kit will be going out for 285.00 plus shipping only the actual shipping cost the v6 version is in development . I am trying to figure out how to get the sound clip up and a picture . Thanks all

Yes actually I was thinking about this last night as Im an enthusiast like everyone one here. So here is the time for us as fusion owners to have choices . The axle back is a great alternative . Like you said it can be more cost effective. So I'm giving the options to you all pick your set up as I'm making all these by hand one at a time . Pick single exit dual out the side what muffler you want I would personally stick with a magnaflow or Gibson universal do to being stainless. Also I can make the steeda kit work I would just have to fab a box for it to be in so it actually pressurized at speed also going to be offering a factory air box mod for RAM air as a more cost effective option . So now is is the chance for us to make our cars stand out from the rest .

My car is a 2.5 and actually all cars are the same .2 1/2 pipe so the set up will work on all the cars. I can also make a bolt on kit to exit where ever you would like . Just let me know and I can figure it up .

So if you are a fusion owner who is tired of the lack of availible parts for the car as i am. This maybe for you. I am almost done with a couple products to help set our cars apart from the rest. One being a dual side swept nascar style exhaust. the outlets are 2"x6" ovals the pipe actually tappers out to that size. it will be a full bolt on kit with all harware needed to install. ansd will be fully stainless steal. The kit will fit every fusion just not sure how it will work on the sport with the body side molding as my car is not a sport which is what all the parts have been fit on. The second item Is a real fully functional ram air intake/cold air it will have a scope picking air up from behind the bumper grill feeding into a sealed box also this will be 100 percent stainless. All parts will be hand made and very high quality. Also i am try to keep the price down as best as possible. so the more interest there is the more pipe and flat steel i will buy at one time bring down material cost. which brings down the overall price. to give an idea a few here and there exhaust i can do for around 500 plus shipping the intake for around 375 Thanks all.

Yes it will fit perfectly however you will also have to get the insert panel from a v6 for the rear bumper. also either way you will prolly have to wait another 3 months since thats when the first exhaust for the 10s is released i also have a 10 4cyl and want to put the v6 magnaflow on it good luck and happy modding

Yes goodluck on your to its gonna be sweet