I decided to give my Fusion Hybrid its first oil change today and ran into a little trouble. Fordparts.com listed (entered vin number to find out) the oil filter as FL-910S which I then went out and bought. After getting the car up on the ramps, removing the covers for the oil drain and filter, and draining the oil, I proceeded to remove the oil filter. It wouldn't budge. As hard as I tried, I couldn't get it off.
While struggling with the filter I noticed that its replacement was a different size. It was much shorter, but the same diameter. Strange, I thought as I went to check the owner's manual which lists the filter as FL-2017B. Next I checked the web to see what I could find. This CHART says the FL-910S is the correct filter. Luckily I still have my old car, so I went to Pep Boys to see what I could learn by looking at the FL-2017B. It turns out that it's an insert type filter while the FL-910S is a regular screw on filter. They didn't have the cannister that holds the FL-2010B, so I still don't know which is correct. I gave up struggling with the filter and just added fresh oil. The car has only at 5000 miles on it, so I'll just let the dealer fight with the filter in a few thousand miles.
Has anyone here replaced their oil and filter and have the answer as to which filter is correct?