Search the Community
Showing results for tags 'body work'.
Found 2 results
-
Does anyone have experience with the Ford Sectioning or Body Repair guidelines and Workshop publications for 2006-2009 Fusion or Milan? I find it odd that Ford Service offers free publications for only a few models / years but doesn't support the Fusion at all in these publications. -
I recently bought a used 2010 Fusion fender because mine is all dented up. We verified through vin number that the colors and models were the same. I started to take my fender off and was able to take off the bolts under the hood, under the cap in the corner by the windshield, the pins on the liner to get the screw off, and the bolts under the car. I tried to take it off and it still seems connected at the door area. I noticed there are 2 stud like thing (not screws or bolts) sticking through holding the fender on about 1/3 and 2/3 of the way down on the door sill when I open the door. There is also a bolt 1/2 way down in the same place, I believe that those 3 things attached to the frame are causing the fender to stay on, I've also detached the clips from the bumper so there shouldn't be a problem their either. If anyone has a method or solution, please just comment below. Thanks for the help!!!
