Search the Community
Showing results for tags 'broken'.
-
I have a 2014 Fusion SE with the base radio and out of nowhere all of my outlets stopped working. I've checked the fuzes in both panels and all of them are good.
-
Hey guys, 08 ford fusion 5-speed. In the last year, i have replaced both front struts (twice), both sway bar links (twice) and the outer tie rods. I also replaced the strut mounts with brand new units both times. I put monroe sensa tracs on the first time and started to get a "clunking" noise, i took it to get an inspection where i was told everything is tight and that it is the nature of the Monroe struts. I did some research and found that KYB struts are OEM so after some time and gradual increase to the "clunking" noise, i installed KYB struts. Both times i replaced the sway bar links for good measure. Now that i have the KYB struts it was nice and quiet for almost 2 weeks, now i get a "rattle" noise without a lot of suspension travel, just a small bumb at low speed all the way up to faster speeds, same "rattle" I took it again this morning for an inspection and was told that everything is tight. I have physically checked every bolt, bushing and component in the front end and am now at a loss... Any and all help would be substantially appreciated. Thanks
-
Late last year I went to use my sunroof (to open completely) when I heard a loud "pop" followed by the sunroof not retracting. Short of forking over the ~$1000 it will cost to diagnose and fix the problem, I was wondering if anyone on here has had a similar issue. I see many issues with the sunroof not closing, but mine is the opposite. What I know so far: Reaching up into the track area, behind the rubber debris guard on the driver's side, I discovered plastic chunks the size of small pebble When trying to retract the sunroof into the headliner, it will not move When trying to raise the sunroof, one side (the passenger side) will raise completely while the other sits flush with the roof of the car Any suggestions on what could be wrong or similar experiences you'd like to share? Thanks!
-
Like an idiot, I backed into my garage tonight while misjudging the distance between the door and my left mirror. Needless to say, the mirror assembly broke off into 3 different pieces. After gathering said pieces, I was able to snap everything back together and re-attach it to my Milan temporarily. It'll have to stay this way until I have the time to pick up a replacement, and install it, as it seems pretty sturdy for now. Somehow the image is distorted now, I didn't know how you could bend glass like that. I'm just worrying that if I go too fast and/or hit a bump, the whole thing will come apart again, and this time, I'll lose all the pieces. Any suggestions for keeping it together until I can properly repair the damage? Anything other than duct tape will be considered. :D
- 1 reply
-
- driver side mirror
- milan
-
(and 2 more)
Tagged with: