Search the Community
Showing results for tags 'led'.
Found 20 results
-
Hi. I have followed instructions on adding fog lights to my 2020 Fusion SE that did not.come with them. I have standard halogen headlights with no LED signature lighting. I've added the new headlight switch and wiring harness and mounted the LED fogs. I have used Forscan to enable them as well as the dash indicator. I verified the fog light plugs have power when the switch is turned on. However, the fogs never turn on. Even if power is applied directly to them. Any ideas?
-
Hello All! New to this forum, I searched, went through about 10 pages of hits and could not find any info around this topic. The 2020 SE AWD 2.0 does not come with the LED DRL, and for some reason that makes me very mad :) I really want the LED DRL on my headlamps. I see multiple products on Ebay, but I am not one to trust random Chinese suppliers / products without a recommendation. Is it possible to switch out the OEM non-LED DRL headlamps for my Fusion model with an aftermarket or even an OEM replacement for a Hybrid or Titanium that has the LED DRL into the SE? I found something like this: https://www.ebay.com/itm/2Pcs-For-Ford-Fusion-Headlights-assembly-All-Led-Lens-Projector-LED-DRL-2017-20/184167814111?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D20160908110712%26meid%3Ddcb427059e7c455a8352c6fc76ff014c%26pid%3D100677%26rk%3D2%26rkt%3D30%26mehot%3Dlo%26sd%3D352726211609%26itm%3D184167814111%26pmt%3D1%26noa%3D0%26pg%3D2386202%26algv%3DSimplAMLv5PairwiseWeb&_trksid=p2386202.c100677.m4598 Any thoughts or suggestions or advice would be greatly appreciated and thank you all in advance for your help!
-
So I installed H11 led headlight bulbs and with the fan being part of the light unit my dust caps won’t fit back over. Leaving them off is causing condensation to build up inside the headlight assembly and drives me crazy. Anyone figure out a way to make them work? I suppose I could cut around the fan but getting a good seal would be difficult.
-
I have a 2009 Fusion SEL 3.0l and I just installed the Hikari R8-H11 Ultra LED, and after I plug them in, I also verified that the wiring was correct cause they are not like the factory halogen bulb were the plug is one way, you can plug the LED in either way luckily the LED is marked positive and negative but when I turned on the car it threw the left and right headlight warning on the display on the dash, ive never had this problem with a plug n play LED. Any suggestions?
-
I have a 2013 Fusion Energi with the LED brake light, tail light, and turn signals. On the right side only, the brake light and turn signal have stopped working. The tail light works and the left side works fine. Dealer says you can't change out the LEDs, only replace the whole unit for $380. I'm wondering if it could be a fuse or relay but can't find any info about what fuse would serve that light and whether the left and right sides would be on separate fuses. Disappointing because I thought those LEDs would last for a long time, much longer than five years. has anyone else had this issue? Does anyone know which fuse it would be? Thanks for any help. Steve
-
Does anyone know of a list of LED interior lights for the 2019 Ford Fusion hybrid? Are they the same as previous years? If so, are there any videos showing how to swap all interior lights? The lights in the car are bright, but I think cool white would look even better. I’m a neat freak and I detail my car weekly and not only would this help to point out imperfections, but it will also further show how clean I keep my interior. I’m also looking for any cool ideas to make my car look even nicer as it is brand new to me, I just purchased it two days ago. Thanks for any help! Dmaxard
-
How do I wire strip led’s as daytime running lights for my 2014 Ford Fusion. Ideally I’d like them to stay on anytime I have the car on so I’m not sure if there is a specific way to wire them or not. Any help would be appreciated. -
I have a 2014 Titanium and on each door is a small red LED that lights up when I lock the car, and turns off when the car is unlocked. One of these lights are out, and I don't want to go through the hassle of removing the door panel to replace that light if I don't have to. It almost seems as if it can be popped out with a screwdriver but when I tried it did not budge. Does anyone have experience with this? I can't seem to find an answer anywhere! (In this picture its the small circle on the left top of the door)
-
Do the 2017 Fusions have LED headlights? Either as an option or standard based on trim level. Is the actual light produced by LEDs or does it just mean halogen lights with LED running lamps?
-
Hello everyone. So I just bought a 10 piece interior led lighting kit. I went to go look up how to change the puddle lights and came across putting LEDs in I need an extra piece but it was for a 2013. I have a 2010. So I was just wondering am I good to install these lights? And also how do I take the cover off the puddle light cover to change them? Thank you for any help.
-
Hello, I was looking to get a new headlight assembly for my '15 Fusion and I am a bit confused...both the low beam and the high beam appear to be projection lenses (like the low beam OEM) but for some reason the seller insists that the low beam HAS to take D2H bulbs (HID) even though the high beams take H1 bulbs. Is there something that I am missing here? Would it still work if I installed the regular bulbs (H7 and H11)? Thanks to anyone who has any insight on this! -
Weird LED Light Pattern
wblakem posted a topic in Glass, Headlights, Fog lamps, Lenses & Window Tint
I installed GTR LED headlight bulbs on my car the other day. Overall I have enjoyed them, and think they're pretty good so far. However, I have noticed the light pattern to be a little strange and don't really understand why. I'm not sure if I need to aim them differently or what, but I would like to have a sharper cutoff and not as much stray light as I appear to be having. Any assistance on this issue would be greatly appreciated! -
So I've seen several posts around here and other various Fusion forums so I've decided to put my two cents in. I've replaced most incandescent bulbs on my '11 Sport with LED's. (License plate, puddle lamps, and interior map/dome lights). I haven't had a single problem with faintly glowing lights and I leave it to the following. You can't go "cheap" on the bulbs. If you buy $.50 LEDs off eBay and they only have 1 LED YOU ARE GOING TO HAVE PROBLEMS. Head on over to www.SuperBrightLEDs.com and check out the following. These are what I used and they look beautiful and haven't malfunctions after a VERY harsh Indiana winter. License Plate x2: 3710-CWHP3 Puddle Lamps x2: WLED-CW5-CBT Interior Map Lights x2: WLED-WHP5 Interior Dome Lights x3: 4410-CW9 Total the entire order ran me about $50.00 + shipping. Definitely worth the money. Next up I'll be replacing the parking lights/turn markers and back up lights. I'm currently at work right now. I'll post photos later this evening.
-
Beginning a New Post here for G2 specific Fusions and will attempt to compile and combine headlight posts from Blue Oval forums: www.youtube.com/T58aGjDld7I -
Just threw some HIDs in, while i was at it i gave my car a little personal touch :P what do you guys think?
-
I am looking to replace all of the lights on the back of my 06 fusion with LED however, I know if I try to replace the flashers, it will make them go into hyperflash because the on board computer thinks a bulb is out. However I was looking a replacement led bulbs and some said they were CANbus equipped or compatible?? Does this mean they send the right information to the computer so it won't go into hyper flash or does it not have anything to do with that? Thanks everyone. -
From the album: rpoffen
Closeup with halo on -
From the album: rpoffen
Front view with halo and HID on -
From the album: rpoffen
front view LED halo headlights, just halo
