Search the Community
Showing results for tags 'lighting'.
Found 7 results
-
I just bought a 2012 Ford Fusion and was not aware that it had ambient lighting until after I bought it. The ambient lighting does not work. When I press the button, nothing happens. Everything else in the car works perfect - heated seats, dimming rear view mirror - etc. I tried putting in a new fuse and that made no difference. What could be causing the issue and how do I fix it?
-
I am installing 5 led single lights, one in each door, one in the front center cubby hole. 2014 fusion eco-boost 2.0L. where do i wire them all to so they only come on with the dash back-lighting as well as be dimmed with the rest of the dash lighting as well. ?
-
Just picked up a '12 Fusion SEL fully loaded and now experiencing ambient lighting issues. This car was involved in minor flood issues (to the floorboards) but since has been restored. My issue that the ambient lighting system was originally only displaying a few colors and they were all different (ex. red on one light and white on another light) and this would change after pressing the button. Now, there is NO lights (cupholder or anywhere in the cabin). What could be causing the ambient lights to work sporadically and now not at all? Is this issue repairable by myself? Note: I found an "Ambient lighting control module" on eBay, which was attached to under one of the cupholders when I took apart my center console. Could this be the issue, or something with the wiring? Any suggestions much appreciated!
-
Hello everyone. So I just bought a 10 piece interior led lighting kit. I went to go look up how to change the puddle lights and came across putting LEDs in I need an extra piece but it was for a 2013. I have a 2010. So I was just wondering am I good to install these lights? And also how do I take the cover off the puddle light cover to change them? Thank you for any help.
-
I'm thinking about purchasing the oem interior ambient light kit, but I had a couple of questions I can't seem to find answers to anywhere. First off, how are these lights controlled? Are they going to be integrated into the MyFord Touch system like it is on the Titanium trim? If not, is there another kit I can purchase, that will work with this? Second, is this something that is fairly easy to install yourself? Or should I look into having the dealer do it for me... Any help with any of these questions would be greatly appreciated! Cheers
-
Just threw some HIDs in, while i was at it i gave my car a little personal touch :P what do you guys think?
-
Okay so I finally went ahead with my plans to do a dome light override modification. I've always liked getting in a car and not being blinded at night I just find it convenient. The procedure is really simple and if anyone wants to do it, the total cost for me was $6 for a switch and crimp connections and some 18 gauge wire. Pictures are self explanatory but the method is to pull of the A post cover on the passenger side and disconnect the big plug. Snip the grey/purple wire, peeling back enough tape to give you crimping room, and attach a crimp at each open end of the wire. Then you crimp two 5 foot lenghts of your new wire onto each crimp and run them up the A post and across the headliner to the map light/overhead compartment. Once that is done you can take the overhead compartment out and make your hole for your switch. I got mine at radioshack, it used a 3/4 hole and was the flushest I could find. You can install the switch anywhere you want though so don't take wire lenghts literally. I considered somewhere near the dash but didn't find anywhere I liked. Install the switch then solder on the two wire leads and then tuck in the excess before re-installing the whole unit. Then you're good to go. All lights are functional when the switch is off, ie when you turn the light on manually with its corresponding button.
