Jump to content

Fog Lamps won't work after replacing bulb


Recommended Posts

I need ideas on what could be wrong with my Fog Lamps. My Drivers Side Lamp has been burned out for a while, so I went to replace it today. I replaced it with the same spec as called for, and it matched the old bulb specs. After replacing it, both fog lamps won't work at all. At first I thought I had burned out my fuse. Already checked it, and it seems to be good. I checked my manual for possible relays that could be linked to the Fog Lamps and have seen nothing. I swapped the lamp back to the old one, put the new one back in, and also unplugged the Neg Batt terminal to see if the system needed to be reset for some reason. Still no dice. Any ideas? Thanks!

Link to comment
Share on other sites

I don't mean to insult your intelligence, but you don't have the brights on do you? Or you didn't accidentally bump the headlight switch in and turn the fogs off did you? I'm just asking, because it's the simplest thing that the 2 sides have in common,and the simplest things are the most often overlooked.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...