dpeters Posted April 23, 2016 Share Posted April 23, 2016 I just changed mine and it is a pain in the butt. I had to use a 1/8" hose and finally fished it down but it was still tight. You can try a hard vacuum line (Dorman Part # 47417) but I found a fuel line that worked. It takes forever to pump out because of the small diameter. To fill I ran a 1/4 tube from the top of the motor and down the firewall and into the fill hole and used a one liter container with a small tip cut off. Took about an hour to fill and an hour to pump it out. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.