greenlight2292 Posted September 25, 2017 Share Posted September 25, 2017 I just recently purchased a 2015 Ford Fusion. After looking at the Car Facts report I found that a remote start option was installed. After talking to the dealer, they said not a chance, it must not be right. When I got home I was looking through the display, I discovered a remote start option that allows me to turn it on and off and set the duration. So that got me thinking… After some online investigating, I found this part (7J-19G367-AA) near the fuse panel. With all the searching that I found, I am convinced this is the remote start module that was on the Car Facts report. My car is a keyed start with the flip key fob. It only has the Lock/Unlock/Trunk Release and Horn button. Through my digging I found that a Lock/Unlock/Lock command can be used to start the vehicle. I did try with no luck. I did also find that you can program the module by turning the key 8 times, again no luck. Does anyone out there have suggestions?? 0 Quote Link to comment Share on other sites More sharing options...
timwil56 Posted September 26, 2017 Share Posted September 26, 2017 I cant help with your programming question, but checking here will list if the car was built with remote start installed. https://www.etis.ford.com/ 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted September 26, 2017 Share Posted September 26, 2017 On 9/25/2017 at 3:11 PM, greenlight2292 said: I just recently purchased a 2015 Ford Fusion. After looking at the Car Facts report I found that a remote start option was installed. After talking to the dealer, they said not a chance, it must not be right. When I got home I was looking through the display, I discovered a remote start option that allows me to turn it on and off and set the duration. So that got me thinking… After some online investigating, I found this part (7J-19G367-AA) near the fuse panel. With all the searching that I found, I am convinced this is the remote start module that was on the Car Facts report. My car is a keyed start with the flip key fob. It only has the Lock/Unlock/Trunk Release and Horn button. Through my digging I found that a Lock/Unlock/Lock command can be used to start the vehicle. I did try with no luck. I did also find that you can program the module by turning the key 8 times, again no luck. Does anyone out there have suggestions?? Does your label show 2 more digits in front of the "7J"? That would be helpful 0 Quote Link to comment Share on other sites More sharing options...
greenlight2292 Posted September 26, 2017 Author Share Posted September 26, 2017 eGuru: It has an "FS" before it. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.