_batres408 Posted August 7, 2013 Share Posted August 7, 2013 (edited) whats up guys, i just got a new V6 2010 Fusion Sport 18k miles. I just wanted to know what mods anyone has done to a 2010 sport to bring up the HP, for right now my car is completely stock other than widow tints, want to know what good exhaust their are for the car don't want a really loud noise just a slight rumble. Also any other mods that will increase my HP basic bolt ons and stuff, i'd appreciate all the replies im tryna get my baby up to 300HP Edited August 7, 2013 by _batres408 0 Quote Link to comment Share on other sites More sharing options...
Big Jim Posted August 7, 2013 Share Posted August 7, 2013 There are no quiet exhaust mods. One guy installed Magnaflows and turned around and went back to the muffler shop to have the stock mufflers put back on. The most helpful modification is a Steeda Tuner. 0 Quote Link to comment Share on other sites More sharing options...
RohitKumar Posted August 20, 2013 Share Posted August 20, 2013 yes get the steed tuner pack, BEST mod by far! also look into the steeda front strut bar, and whiteline rear sway bar, both help enormously with reducing body rolling and helping with turns/cornering! 0 Quote Link to comment Share on other sites More sharing options...
Big Jim Posted August 20, 2013 Share Posted August 20, 2013 The nicest modification I made to my Sport was the installation of Mazda Speed 6 brakes, front and rear. They use considerably larger rotors and require changing the calipers, caliper brackets, and pads. It's all bolt on stuff. Look to spend about $1000.00 with blank rotors. I ended up with about $1200.00 with drilled and slotted rotors. The improvement in braking is dramatic. 0 Quote Link to comment Share on other sites More sharing options...
FusionDiffusion Posted August 20, 2013 Share Posted August 20, 2013 The nicest modification I made to my Sport was the installation of Mazda Speed 6 brakes, front and rear. They use considerably larger rotors and require changing the calipers, caliper brackets, and pads. It's all bolt on stuff. Look to spend about $1000.00 with blank rotors. I ended up with about $1200.00 with drilled and slotted rotors. The improvement in braking is dramatic. I don't think you can get the front calipers anymore. They all require you to send in calipers you already have for rebuilding. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.