Rlivolsi13 Posted March 27, 2015 Share Posted March 27, 2015 Okay, so last week the dash said to check my drivers side rear turn signal. I replaced the bulb, still nothing. In addition, when I use the passenger side turn signal, the passenger side tail light flashes instead of the blinker. I checked all my fuses, nothing. I tried swapping the passenger and driver side turn signal fixtures, still nothing. If I put te hazards on, the two front turn signals and the passenger side rear tail light blink. I ran the system check on the dash, it only says to check my left turn signal if I have it activated, otherwise it reads all okay. I'm seriously having difficulty figuring this out, any help would be appreciated. 0 Quote Link to comment Share on other sites More sharing options...
andyross Posted March 29, 2015 Share Posted March 29, 2015 If a bulb blinks backwards, or you get some weird other lights blinking instead, that can be the sign of a poor ground. If you haven't already, you may want to at least check the bulb and remove/reseat it, or even just go ahead and replace it. Since the tail lights have 2 filaments, if the common connection goes bad, the current goes through both filaments, causing all sorts of weird effects. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.