jburkitt Posted October 12, 2016 Share Posted October 12, 2016 Hello all.I have a 2009 mercury milan Premier with 8 speakers and a factory amp. I have replaced the stock HU with an aftermarket one Pioneer AVH4100NEX, i have also replaced the two rear deck 6x9 speakers with pioneer ones. I've added a Pioneer amp and Sub, everything works great however, i no longer have control of the factory amp so i am installing another one, nothing big, just something to control the 6x9's in the deck. I want to retain the factory wire harness that goes to that amp but don't know what wire does what. Anything i see on the internet as far as wire diagrams go does not include the diagram going to the factory amp. I know which plug is for the speaker out put and which is the power, and i have a vague idea which wire is the accessory wire for the factory amp. Anyone have any ideas where i can get the correct diagram from? Or if you have one atleast let me know which wire is which before i blow something other than a fuse. Thanks. 0 Quote Link to comment Share on other sites More sharing options...
akirby Posted October 12, 2016 Share Posted October 12, 2016 Crutchfield will have detailed instructions - not sure if you can get them without buying something but might be worth checking. 0 Quote Link to comment Share on other sites More sharing options...
jburkitt Posted October 12, 2016 Author Share Posted October 12, 2016 Crutchfield will have detailed instructions - not sure if you can get them without buying something but might be worth checking. I already checked with them, i love crutchfield they are amazing, but no help this time 0 Quote Link to comment Share on other sites More sharing options...
akirby Posted October 12, 2016 Share Posted October 12, 2016 They don't have instructions for installing an aftermarket amp in an 09 Fusion with the audiophile system??? 0 Quote Link to comment Share on other sites More sharing options...
jburkitt Posted October 12, 2016 Author Share Posted October 12, 2016 They don't have instructions for installing an aftermarket amp in an 09 Fusion with the audiophile system??? not unless i buy an amp or something from them, or i pay $10 for a master sheet. I don't want to sound cheap, but i don't even know if the diagram i pay for will have what i am looking for. 0 Quote Link to comment Share on other sites More sharing options...
akirby Posted October 12, 2016 Share Posted October 12, 2016 Well that's entirely different than "they were no help". 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted October 13, 2016 Share Posted October 13, 2016 not unless i buy an amp or something from them, or i pay $10 for a master sheet. I don't want to sound cheap, but i don't even know if the diagram i pay for will have what i am looking for. Seriously, you won't take a chance and spend $10 for a diagram? Aren't you the guy who had the clunking sound on the 08 Fusion and spent big money replacing the struts and sway bar links when the issue was only loose strut mount bolts. Well, maybe I would now be gun-shy too after unsuccessfully using the big hammer approach to solving problems. I'll see if I can find you some pin-outs. 0 Quote Link to comment Share on other sites More sharing options...
drolds1 Posted October 13, 2016 Share Posted October 13, 2016 (edited) Post moved to the appropriate forum from Articles, News & Reviews by moderator . Per header for that forum: This section is for articles, news & reviews only.DO NOT post non-news topics in this section. Edited October 13, 2016 by drolds1 0 Quote Link to comment Share on other sites More sharing options...
jburkitt Posted October 13, 2016 Author Share Posted October 13, 2016 Seriously, you won't take a chance and spend $10 for a diagram? Aren't you the guy who had the clunking sound on the 08 Fusion and spent big money replacing the struts and sway bar links when the issue was only loose strut mount bolts. Well, maybe I would now be gun-shy too after unsuccessfully using the big hammer approach to solving problems. I'll see if I can find you some pin-outs. Yeah, the fusion is my wife's car, the loose bolts were not the ORIGINAL cause of the clunking when i started changing stuff last year. The items i replaced needed replacing anyway, and the second replacement was done under warranty. I don't want to spend the $10 on something as i said that may or may not contain the diagram i am looking for. I am leary because i haven't been able to find anything so far that is specific to what i am looking for. Thank you for looking for pin-outs. 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted October 13, 2016 Share Posted October 13, 2016 BN-RD 12V -Hot at all times BK-YE GND VT-RD Enable VT-GN Input + GN-WH Input - 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted October 14, 2016 Share Posted October 14, 2016 BN-RD 12V -Hot at all times BK-YE GND VT-RD Enable VT-GN Input + GN-WH Input - Was this the information that you needed? 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.