Brad65 Posted December 10, 2016 Share Posted December 10, 2016 10Dec16 I replaced the factory map lights with LED ones , but now they wont turn on when the car is running, when i push the switch. When the is off they will they turn on, when i open the doors and the trunk light and the mirror linghts do not turn on at all. How ever I did not change trunk or mirror to LED as of yet , and wasn't sure if that issue was related. Thank you 0 Quote Link to comment Share on other sites More sharing options...
fusionff Posted December 10, 2016 Share Posted December 10, 2016 I would put the old bulbs back in and see if the issue persists. 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted December 11, 2016 Share Posted December 11, 2016 Ypu blew a fuse in the SJB. 10A 0 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted December 11, 2016 Share Posted December 11, 2016 Probably a resistance issue. Sometimes if you put too many LEDS in the system, it will freak out. One or two, all is well. Hopefully did not blow a fuse, that would not be good. Definitely put back the stock bulbs and see what happens. Do you have the technical specs for the LEDs you have installed? 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted December 11, 2016 Share Posted December 11, 2016 It is F25 in the SJB. Probably nothing wrong with the LED's. Sometimes you can short the + side feed to ground if you aren't careful when installing bulbs. The trunk light is especially easy to short by its design. 1 Quote Link to comment Share on other sites More sharing options...
Brad65 Posted December 12, 2016 Author Share Posted December 12, 2016 Thanks for the all the info it was after all a 10a fuse , #25again thanks for your help. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.