coldwaves Posted April 9, 2017 Share Posted April 9, 2017 (edited) It is for a 2014 Ford Fusion SE with 2.5L engine. I have a few of the plastic pin/fastener missing from the bottom of the front bumper (probably because I scratch the bottom of the bumper when I drive out of a steep driveway). I would like to replace them. What are the part number of these? I tried to look on Fordparts.com but I am not sure whether I am looking at the correct part number. I took a screen shot of a video tutorial on front bumper removal. The picture shows what I am talking about. The video is here: At 2:49 you can see where these plastic pins are. Thanks! Edited April 9, 2017 by coldwaves 0 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted April 9, 2017 Share Posted April 9, 2017 I think the part numbers starting at 7 ... https://parts.levittownfordparts.com/auto-parts/2014/ford/fusion/energi-titanium-trim/2-0l-l4-electric-gas-engine/body-cat/bumper-and-components-front-scat 0 Quote Link to comment Share on other sites More sharing options...
coldwaves Posted April 9, 2017 Author Share Posted April 9, 2017 I think the part numbers starting at 7 ... https://parts.levittownfordparts.com/auto-parts/2014/ford/fusion/energi-titanium-trim/2-0l-l4-electric-gas-engine/body-cat/bumper-and-components-front-scat Thanks! It seems number 7 is not what I am looking for. Number 11 is held in place with three pins. One closest to the center is a screwed in bolt and the other two are plastic push in pins. These two plastic pins are what I am looking for. It seems the diagram did not show the pins. 0 Quote Link to comment Share on other sites More sharing options...
coldwaves Posted April 9, 2017 Author Share Posted April 9, 2017 Here is a better view. I am looking for the green circle in the second picture. http://www.happywrenching.com/ford/fusion/ford-fusion-front-bumper-cover-removal-guide-second-gen-2013.html 0 Quote Link to comment Share on other sites More sharing options...
coldwaves Posted April 9, 2017 Author Share Posted April 9, 2017 (edited) After some search, I think W716510-S300 is what I am looking for. It is the same retainer used in fender liner. Edited April 9, 2017 by coldwaves 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.