Jump to content

Left High / Low beam not working on Fusion 2009


marco
 Share

Recommended Posts

Hi guys,

I have a problem with left headlights, the Low and High beams are not working, I changed the bulb but the issue continues. I checked the voltage in the harness and shows 12v, but when the bulb is connected the voltage drops to 0. I've checked the fuse in the SJB and it's ok, but it only shows it for High beam, I don't know where is the fuse for Low beam. I'm planning to reconnect the SJB to see if it helps. Any help is appreciated.

 

Thanks.

Link to comment
Share on other sites

I'll check again the manual but didn't saw anything about low bean. For the ground test, I connected the bulb terminal directly to battery ground and the positive terminal from bulb to the positive contact from low beam connector and it didn't work.

Link to comment
Share on other sites

Check BJB fuse F7 for the left low beam. The high beams have only one fuse in the BJB (F19- 40 Amp) and can't be the problem as the issue is limited to the left side.

 

So far, from the symptoms described, it sounds like the wiring harness has a break in both the low and high beam feeds.

 

Has your car been accidented in left fender area?

Edited by eGuru
Link to comment
Share on other sites

Ok, I'll check that fuse after work. BTW, the right beam is always on when car is running and it supposed that this car has not automatic lights.

 

Answering you question, I think yes, this car could had an accident. Thanks.

Link to comment
Share on other sites

  • 5 years later...
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...