bsamuels Posted February 23, 2018 Share Posted February 23, 2018 So as the title states I am looking to refurb this 'finish panel' as the prices for these pieces are a bit ridiculous. And as it is something to receive more wear and tear I'd like to be able to do it again when needed in the future. I am having some trouble finding paint though for it and confusion with color codes/numbers. The color code for my vehicle found inside driver door is 'DL'. From my searching online I believe the color to be Medium Light Stone(sometimes seen online as 1T3A). I am looking for any suggestions on sourcing products and doing myself. The following is a link for about the closest item I have found online. https://touchupdirect.com/shop/touch-up-paint/ford-medium-light-stone-interior-1t3/ Although it does have the number as 1T3 without the 'A' which is a bit concerning. I have also attached some photos of the piece to display the color. Again, any and all help is appreciated as I have done a decent amount of searching with very little luck. Maddening that Ford doesn't sell these paints anymore. They obviously want us to purchase new parts at the ridiculous prices. Side note: I know chrome pieces need some love also; but that is something I figure I could use a more generic product. And excuse the dirtiness. Need to get her cleaned up but it's been raining a good bit here recently in Texas. 0 Quote Link to comment Share on other sites More sharing options...
propwash Posted February 23, 2018 Share Posted February 23, 2018 Just a thought, but if you can't find an exact color match, have you ever thought about going with a contrasting color, such as a grey or charcoal? That way, you won't have to worry about getting an exact match to something that's already there. There is also the possibility that you might find something is a salvage yard that is in pretty good condition. That way, all you'd have to do would be to swap out the parts. God luck and keep us posted. 1 Quote Link to comment Share on other sites More sharing options...
bsamuels Posted February 24, 2018 Author Share Posted February 24, 2018 (edited) I had briefly thought about going that route. Was thinking just a similar silver(or 'stone' like they have chosen to call it). The attached picture is the only other piece that is the same color so I'd need to remove it as well. Which I have never looked into that process but will today as this seems like it is going to be the easiest and best route. I have seaarched and called every automotive place and I don't think anything that is for sale is going to match perfectly. If by chance you have any information on the removal of this piece it would be appreciated. I just recently bought some trim removal tools so this will be my first use of them(bought them when I was debating replacing a window actuator or whatever it's called; but decided to take it to a family friends collision shop who replaced pretty cheap). Yeah. I looked online but as these pieces seem prone to discoloration from being touched I was thinking I better go the route of something that can be replicated in the future. Thanks for the response though. It is much appreciated. For some reason I was hesitant on going with another color but I think this is the best course of action. Edited February 24, 2018 by bsamuels Attachment not correct 0 Quote Link to comment Share on other sites More sharing options...
eGuru Posted February 24, 2018 Share Posted February 24, 2018 (edited) This video covers more removal than you will need to perform but covers what you need to see. I highly suggest the use of your plastic panel removal tools though. You may be able to get away without removing the retention strap for the dash top storage bin assembly. Edited February 24, 2018 by eGuru 1 Quote Link to comment Share on other sites More sharing options...
bsamuels Posted February 24, 2018 Author Share Posted February 24, 2018 Thanks for the reply and the video link. Yeah. Those tools will definitely come in handy. I'm pretty good with disassembly but they certainly help to avoid scratching anything. 0 Quote Link to comment Share on other sites More sharing options...
sirtanon Posted February 26, 2018 Share Posted February 26, 2018 I have been considering resurfacing/refinishing the interior panels in my 2010 for a while now, including the center console, radio surround, door arm-rest inserts, etc.. I have already picked up a roll of this: Done right, I think it can look quite nice: I've also seen brushed aluminum, but I personally like the 'carbon fiber' type more, at least for my Fusion. 1 Quote Link to comment Share on other sites More sharing options...
propwash Posted February 26, 2018 Share Posted February 26, 2018 Wow! That really looks nice. Was that stuff the self-adhesive peel and stick type, or did you have to use separate adhesive? 0 Quote Link to comment Share on other sites More sharing options...
sirtanon Posted February 27, 2018 Share Posted February 27, 2018 (edited) prop - it's This kind of stuff that I found on Amazon. Price is good, and it's pretty forgiving. You'll need either a heat gun that you can set on LOW heat, or a hair dryer. You want the vinyl to be soft and pliable to be able to get it into the curvy bits, etc.. properly. You'll also need to make sure you have a very sharp, fine quality razor to trim it cleanly, and it also helps to have a good set of plastic trim tools. A kit like this one would work great. Also, for what it's worth, part of me really wishes I'd known about the silver carbon fiber vinyl wrap instead: Edited February 27, 2018 by sirtanon Forgot a tip and link 0 Quote Link to comment Share on other sites More sharing options...
bsamuels Posted February 28, 2018 Author Share Posted February 28, 2018 sirtanon: Thanks for the response. Hadn't thought of a wrap. I am definitely going to look into that. With the humidity we've been having here in Texas; along with my total inexperience painting I might have to go this route. I had been doing some research on painting with spray cans but this seems about as difficult but doesn't have to contend with the humidity(which it's been constantly raining and huumidity is up there here near the gulf coast). Anyways, thanks for the recommendation. It is much appreciated. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.