Jump to content

Backup camera works partime please help!


Recommended Posts

  • 10 months later...
  • 1 month later...

My backup camera will work after the car has been shut off. If you have driven the car and shift from drive to reverse 99% the black screen (sometimes the screensaver appears for a short time) with camera unavailable message appears, the other 1% of the time the camera appears to be working then after a very short time the black screen appears.  I would appreciate any comments and direction to go.  

 

Thank you

Link to comment
Share on other sites

I would suspect that it is a component in the camera that is defective. 

Before replacing it, you should verify that the camera connector in the trunk is receiving 12V when the car is shifted to reverse - obviously you will need a helper to perform this test safely.

Edited by eGuru
Link to comment
Share on other sites

  • 1 month later...

I have the same problem. It will work for a bit then stop. I ordered a replacement camera and installed it. It worked until i buttoned everything up and closed the trunk then it stopped. I reinstalled the old camera and started shaking wires. The only place that it flickered the image was between the trunk arm and the wheel well connector in the trunk. I have to pull apart the wiring to see if I can find the problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...