Jump to content

2010 ford fusion hybrid hesitation on take off


Notacab
 Share

Recommended Posts

Ok im having a issue while accelerating at a dead stop. The car pulses then goes away once i hot 30mph. Its an intermitting issue    No check engine light no wrench light. I have changed the spark plugs and the throttle body. It has 118k on it. Anybody having similar issues out there?

Link to comment
Share on other sites

7 minutes ago, Notacab said:

Ok im having a issue while accelerating at a dead stop. The car pulses then goes away once i hot 30mph. Its an intermitting issue    No check engine light no wrench light. I have changed the spark plugs and the throttle body. It has 118k on it. Anybody having similar issues out there?

What fault codes is your scanner reporting now? What was the code that lead you to replace the ETB?

Link to comment
Share on other sites

6 hours ago, Notacab said:

There are no codes. Someone mentioned that a dirty TB could be the reason so i bought a new one. The old one was full of carbon anyway. 

No codes makes the internet diagnosis rather difficult. 

Have you checked the fuel pump output and pressure?

Link to comment
Share on other sites

I was thinking about the fuel pump but did not check it. With the miles that this car has and since i use it for uber i should replace that part anyway. 118k and i add about 150-200 miles a day. Seems like an easy job to replace the pump. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...