Adding Subwooder and Amp to my 2018 ford fusion SE

[Bradish54]

I want to add a subwoofer to my 2018 ford fusion, i am going to run a 2 channel amp for the front 2 speakers (6.5 inch kenwoods) 100 RMS, then add another amp for a subwoofer. i have a line out converter to use by NVX (xlca2) similar to the audiocontrol LC2i. my question is would it be okay to tap into the rear deck subwoofers instead of tapping into the rear door speakers? my main goal is to not have to take out the factory stereo. I know the rear deck subwoofers have a amplifier to power them so i wasnt sure if they had a crossover that would mess up signal going to the loc or if it would be okay to tap into those instead of the rear doors. I was going to run 1 power wire to a distribution block to power both amps, then ground both. either the rear door/rear deck subwoofers to the LOC, then also power the loc with its own power wire from the battery or add it to a pre existing fuse. If anybody has used those rear deck subwoofers to run a amp let me know if its possible and how it turned out, if nobody knows then i will just stick with tapping the rear door speakers. 

Edited April 12, 2020 by Bradish54

[Clueless66]

Here is a web site that may make your wiring plug and play. This is the page for your model fusion. You may need to call them if you have questions.  I found this site while I was off work for awhile with back problems. I was looking for a way to wire in amps without cutting wires.

 

https://plugnplaykits.com/search?type=product&q=Ford+Fusion+2019

[wickedwarnings]

Just joined...thanks for the links I just ordered from that place. 

[Audiophile14Fusion]

Go to idata's website. You'll need a meastro RR

[MTLEADER]

Do you guys know the wiring for a 2019 Fusion S? I'm going to add a amp and sub also but I have to cut in to add my output converter ( tight budget ). I'm better with older cars, there isn't so much computer stuff there and there is a ton in these newer cars. My stereo in my Fusion is the one with the tiny screen. 

[Nick310]

On 3/11/2021 at 1:57 AM, MTLEADER said:

Do you guys know the wiring for a 2019 Fusion S? I'm going to add an amp and sub also but I have to cut in to add my output converter (tight budget). I'm better with older cars, there isn't so much computer stuff there and there is a ton in these newer cars. My stereo in my Fusion is the one with the tiny screen. 

 

This spreadsheet should apply to Ford Fusions 2013-up with the 8" screen WITHOUT the Sony sound system.