Car stereo

[Rat69]

I have a 17 fusion se with 11 speaker system, I have a lp7-2 loc. My question is where to hook remote wire so when I shut my radio off the loc goes on and off with factory radio. Can I splice into the remote turn on for factory amp in trunk and if so what color is remote wire.

Edited May 16, 2020 by Rat69

[bbf2530]

2 hours ago, Rat69 said:

Lp7-2, when plugged in it comes on with radio off, tied into rear speakers 2017 fusion se no sync. Where to run remote wire.

 

Hi Rat. You do not give much information in your post, but perhaps an audio expert would know what you are referring to with the information you posted. 

 

So that being said: I am no audio expert and had to Google "Lp7-2" to see what it was. You probably already know what I am about to mention, and it probably will be of little to no help...so take my advice with a grain of salt.

 

It seems you want the Lp7-2 to be "switched", turning on/off with the audio system, is that correct? However, your post would lead me to believe you wired it into an unswitched/always on power circuit. I would think you need to wire it into the same circuit as the audio unit or another similar one.

 

Perhaps another member with more audio system knowledge will have a better understanding and jump in. Let us know how you make out and good luck.

 

 

Edited May 14, 2020 by bbf2530

[Multitask]

In a search for that... it's an add-on module, beyond that not sure what they want... 

Might be better to ask the manufacture and explain what you have and expect from it.