Paul T Posted June 6, 2020 Share Posted June 6, 2020 Okay, I've read about this a few times. The majority of posts Ive read tried changing many things. Coil packs, engine mounts, "torque mount" (dogbone), Transmission mount, plugs.. The only one I've read that said it was solved was replacing the transmission mount. The symptoms seem to be the same though. Vibration at idle at stop under load. A/C compressor makes it a little worse. Put in Neutral and the vibration goes away. Looking for opinions or answers. Paul T. 0 Quote Link to comment Share on other sites More sharing options...
Paul T Posted June 27, 2020 Author Share Posted June 27, 2020 (edited) Just an FYI. After researching the vibration at stop under load for a few weeks, I decided to go ahead and replace all the mounts. I have a 2011 fusion sport, 153K miles but I keep it up. Anyway, What I found was the gfront motor mount and the tourqe strut looked eh but the transmission mount was destroyed. The metal conneting rod in the center was 100% torn away from the rubber vibration dampening material. Replaced all and the cars ride is super smoth in all modes, park, drive, stop in gear. No vibration at all. This may translate to other fusion models also. Pass it on. This may not be the only cause for vibration, I can think of a few more, but it seemed logical. Paul T. Edited June 27, 2020 by Paul T 0 Quote Link to comment Share on other sites More sharing options...
casualdriver Posted November 13, 2020 Share Posted November 13, 2020 How much does it cost to replace all the mounts? 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.