GeoDude20 Posted February 28, 2021 Share Posted February 28, 2021 I have a 2017 SE with the automatic climate control. Late last summer I smelled hot electronics, then the AC quit. Compressor is free and spinning, just doesn't turn on. 90% sure it is the sensor in the dash that died. I've been looking to buy the sensor, but ran into an issue. How do I tell which "Human Machine Interface" I have? Ford parts list a version 2, 4 and 5 for different parts, all for 17 fusions with dual zone climate control. Thanks! 0 Quote Link to comment Share on other sites More sharing options...
bbf2530 Posted February 28, 2021 Share Posted February 28, 2021 5 hours ago, GeoDude20 said: I have a 2017 SE with the automatic climate control. Late last summer I smelled hot electronics, then the AC quit. Compressor is free and spinning, just doesn't turn on. 90% sure it is the sensor in the dash that died. I've been looking to buy the sensor, but ran into an issue. How do I tell which "Human Machine Interface" I have? Ford parts list a version 2, 4 and 5 for different parts, all for 17 fusions with dual zone climate control. Thanks! Hi GeoDude. If another member does not have the information, I would recommend going to the Parts Department of your Ford Dealer with your VIN, and asking them which part number you need. I find it often gets better results to stop by and speak to the Parts Department personnel face to face, as opposed to calling. Alternately, some online Ford Parts sellers use the VIN to determine exact equipment and parts numbers, so you could try them also. Let us know how you make out and good luck. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.