Bob1234 Posted April 13, 2022 Share Posted April 13, 2022 I have searched to the ends of Google and YouTube looking for a way to remove the pipe leading from the EGR valve to the engine block. I can easily remove the 2 bolts securing the egr valve to the manifold. There is a pipe fitted with a nut on the end of it that attaches to the egr valve. there is no way you can get a socket on the bolt because the pipe blocks it. you can only use a wrench however there is no clearance for a wrench even with the battery removed, intake filter housing, and throttle body. My next attempt would be to remove the upper intake manifold. But to do this i would have to remove the bolts securing the egr valve to the manifold so my fear is that if i were to try to remove that nut from the valve it would break the pipe because there is nothing holding the egr in place while i apply such force. No leverage is the word i was looking for. I don't know what else to try and i am unable to find anything regarding the removal of this pipe on Google or YouTube. I'm at the pulling my hair out stages with this egr valve LOL. 2012 Ford Fusion 3.0l v6. Any help is appreciated. 0 Quote Link to comment Share on other sites More sharing options...
cammcrobb67 Posted May 18, 2022 Share Posted May 18, 2022 Any luck? Same boat here 0 Quote Link to comment Share on other sites More sharing options...
twiggy144 Posted May 18, 2022 Share Posted May 18, 2022 Is it possible to undo the pipe at the other end, where is connects to the exhaust manifold? 0 Quote Link to comment Share on other sites More sharing options...
cammcrobb67 Posted May 19, 2022 Share Posted May 19, 2022 I'm stuck with the down tube as well 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.