Gord b Posted May 25, 2023 Share Posted May 25, 2023 I just want to let everyone know a out my 2009 ford fusion 3.0 stalling. It was not the throttle body although I had P2105. It was the pcm diode at least 99 percent it was as I also changed the relay. Interesting thing I had B1318 battery voltage low. even when it didn't stall. My cheap torque app picked up the B1318 and an expensive snap on scanner didn't get that code. I The car would only stall every couple weeks. As soon as I changed the diode and relay B1318 never came back. It's been a couple months since it stalled and I now have trust in the car. A cheap fix. Too bad I tried the throttle body first. I hope this helps someone as so many posts never come back and say what the fix was. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.