Block141 Posted July 12, 2023 Share Posted July 12, 2023 So as the title says, my driver's side rear window auto up doesn't always work on my 2017 Fusion Titanium. I can do the relearn and auto up will work until I roll the window down more than halfway to which point I need to do the relearn again. Note that auto down always works. It's quite an odd behavior. I figured it has to be something with a position sensor (or however it knows what spot the window is at). During my research someone had said on another forum to pull power to the window while manually operating it to reset the regulator control module, but that didn't help. It's not triggering any sort of pinch detection so I find it odd that it's just that window and just auto up. I figured I would reach out and see what others think, possibly a bad window regulator assembly? 0 Quote Link to comment Share on other sites More sharing options...
jpohlman Posted July 14, 2023 Share Posted July 14, 2023 Are you doing the relearn using the rear door switch or the driver's door switch? The relearn has to be done on the affected door switch, not the drivers switch. A bad driver's door switch pack can also cause the problem. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.