prodijake Posted July 14, 2023 Share Posted July 14, 2023 i bought this fusion two days ago and the a/c was working fine, no issues whatsoever. then as of yesterday i noticed it started blowing warm. so i looked up some possible solutions and started trouble shooting. my ac clutch still spins. my fuses are all good and not blown. but my refrigerant was actually overfilled to 80. when i noticed that i figured that would be the issues so i drained it out until it was are the correct/recommended levels. still blowing out warm air. so i am stuck on what it could possibly be if everything is working how it should be as far as fuses/relays and my ac clutch. anyone have any ideas? 0 Quote Link to comment Share on other sites More sharing options...
WKelley Posted July 14, 2023 Share Posted July 14, 2023 Clogged cabin air filter? Otherwise, you'd need to hook up gauges to the high and low and see what is going on. 0 Quote Link to comment Share on other sites More sharing options...
Haughk Posted August 9, 2023 Share Posted August 9, 2023 Check your ac compressor and make sure the clutch hub plate is still on there mine has fallen off 3 times. The last time I used red loctite so instead of the bolt working itself loose it sheared off... But it would definatly explain the warm air from the AC and is a somewhat common issue. You can get one at the junkyard cheap or they sell replacements on ebay now... 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.