bighank Posted August 7, 2023 Share Posted August 7, 2023 Have 2 original Intelliget Keyfobs. Purchased 2 additional Intelligent keyfobs using the FCCID. Went through procedure in Owners Manual p69-70 multiple times with no luck. Tried other procedures found on Youtube.com with no success. The Keyfobs i purchased are 902 Mhz and look identical to OEM but have different electronics inside. How can I program these Keyfobs without spending a forune at a dealer or locksmith? I have programmed other ford Keyfobs and keyblade IKTS as well as chevy keys. 0 Quote Link to comment Share on other sites More sharing options...
Roxas Posted August 11, 2023 Share Posted August 11, 2023 (edited) Here's how to program a key pretty easy ? 1 Find your backup slot for your keys In the cup holder 2 put your first programmed key in the backup slot with the ford emblem facing up! Make sure it sit flat 3 turn on your car and let it do the seatbelt chime 4 turn off the car and place your second keyfob that is programmed in the slot within 10 seconds and turn on the the car 5 turn off your car and remove and replace the second key with the unprogrammed.(note) if you followed the steps correctly it should say now in programing mode on your cluster). 6 when going to power on the car with the unprogrammed key press and hold the PBS it should program. 7 Continue with your next key and also check to see if there stored. They should show up as admin keys 8 Check for functionality. 9 your done It's stubborn but it works took me a little bit Edited August 11, 2023 by Roxas 0 Quote Link to comment Share on other sites More sharing options...
Sam p Posted January 31 Share Posted January 31 (edited) Key fob questions Is there anyway to turn off the administrative key under “my keys”? Edited January 31 by Sam p Added information 0 Quote Link to comment Share on other sites More sharing options...
bighank Posted February 1 Author Share Posted February 1 On 8/10/2023 at 9:46 PM, Roxas said: Here's how to program a key pretty easy ? 1 Find your backup slot for your keys In the cup holder 2 put your first programmed key in the backup slot with the ford emblem facing up! Make sure it sit flat 3 turn on your car and let it do the seatbelt chime 4 turn off the car and place your second keyfob that is programmed in the slot within 10 seconds and turn on the the car 5 turn off your car and remove and replace the second key with the unprogrammed.(note) if you followed the steps correctly it should say now in programing mode on your cluster). 6 when going to power on the car with the unprogrammed key press and hold the PBS it should program. 7 Continue with your next key and also check to see if there stored. They should show up as admin keys 8 Check for functionality. 9 your done It's stubborn but it works took me a little bit What do you mean by PBS? I have tried this procedure numerous times with no programming programming. 0 Quote Link to comment Share on other sites More sharing options...
Roxas Posted February 2 Share Posted February 2 Push button start make sure your only going into accessorie mode and not starting the engine. Also make sure your quick I turned mine off right around the third chime. Plenty of videos on YouTube showing the process too. I'll need to do again here shortly as I want another 5 button key. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.