Roxas Posted September 5, 2023 Share Posted September 5, 2023 Is there anyway to add oem front parking sensors. I think it would be rather neat to pick up a new front and rear bumper and do this modd kk 0 Quote Link to comment Share on other sites More sharing options...
andyross Posted September 5, 2023 Share Posted September 5, 2023 I'd think it would be much more than just adding sensors. Is there wiring? Will the safety/infotainment/whatever have the software to support it? 1 Quote Link to comment Share on other sites More sharing options...
Roxas Posted September 5, 2023 Author Share Posted September 5, 2023 2 hours ago, andyross said: I'd think it would be much more than just adding sensors. Is there wiring? Will the safety/infotainment/whatever have the software to support it? I've read on the other site that all you have to do is get the specific fog light harness then flash in the pcm so it recognizes the front parking sensors hard part is finding a wiring harness that has ACC and the grille loovers that's what I was reading on the 2g fusion board that's dead. I wouldn't be interested in Auto park as if I was I would go hunt down an mkz 0 Quote Link to comment Share on other sites More sharing options...
WKelley Posted September 5, 2023 Share Posted September 5, 2023 There is almost no chance it is as simple as adding parts and flashing the PCM. You car has to have the PAM module already installed. Depending on the year there might not even be a harness for the PAM as well. 1 Quote Link to comment Share on other sites More sharing options...
Roxas Posted September 5, 2023 Author Share Posted September 5, 2023 4 hours ago, WKelley said: There is almost no chance it is as simple as adding parts and flashing the PCM. You car has to have the PAM module already installed. Depending on the year there might not even be a harness for the PAM as well. Truth that's why I'm not rushing out to buy a harness and bumper. I think all fusion have the Pam module but yeah I would have to flash that as well like I said I don't really care to much about this function I just think it would be cool to have. 0 Quote Link to comment Share on other sites More sharing options...
bbf2530 Posted September 5, 2023 Share Posted September 5, 2023 47 minutes ago, Roxas said: Truth that's why I'm not rushing out to buy a harness and bumper. I think all fusion have the Pam module but yeah I would have to flash that as well like I said I don't really care to much about this function I just think it would be cool to have. Hi Roxas. In addition to the good information which WKelley and andyross provided you...You will also be missing the dash button to enable/disable the Parking Sensor system on demand. Perhaps not a major concern, just something to be aware of. Let us know how you make out and good luck. 0 Quote Link to comment Share on other sites More sharing options...
Roxas Posted September 6, 2023 Author Share Posted September 6, 2023 7 hours ago, bbf2530 said: Hi Roxas. In addition to the good information which WKelley and andyross provided you...You will also be missing the dash button to enable/disable the Parking Sensor system on demand. Perhaps not a major concern, just something to be aware of. Let us know how you make out and good luck. 2017 to 2020 that is instrument cluster so I wouldn't need to worry about that like I said I would need too flash the pcm and the Pam with forscan to recognize everything was there you cannot add auto park on a module that does not have one. I would need a wiring harness that has acc auto park and the finns. Then the parking sensors. Flash everything and make sure it works. Honestly I've done research and it's feasible but I'm I going to do it no. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.