Emre Posted December 22, 2023 Share Posted December 22, 2023 (edited) Hello, I have a 2012 ford fusion hybrid and want to install dash cam with a hardware kit. However, I could not locate (1) 12V-30V rated power fuse slot and (2) ACC fuse slot. After doing some research, I think I can use the courtesy lights slot (located at 9 in the car's inside fuse box) as power fuse slot, but I cannot be sure which one is ACC fuse slot. I am sharing the compartment fuse panel chart here (https://www.startmycar.com/us/ford/fusion/info/fusebox/2012). I really appreciate it if you could help me to locate these two slots. Thank you in advance. Edited December 22, 2023 by Emre 0 Quote Link to comment Share on other sites More sharing options...
povertymobile Posted December 27, 2023 Share Posted December 27, 2023 This is not helpful but I wired mine for 36 (PATS) as power and 13 (SYNC) as acc. It doesn't really work as I planned and it just turns on and off with the car but it's good enough for me so I left it. I am also interested in the answer to this. 0 Quote Link to comment Share on other sites More sharing options...
WKelley Posted December 27, 2023 Share Posted December 27, 2023 Get your test light out and see if any of the slots that are labeled spare on that diagram have power. Tapping into another circuit is dicey, you gotta be careful you can introduce problems if something pulls too much power away from a module. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.