Jump to content

Reset on its own?


jalocker
 Share

Recommended Posts

I've got about 7000 miles on my hybrid, and I have noticed that the system has reset itself a couple of times already. Normally, you're supposed to navigate through the menus and reset all of the stats that way, but I have noticed that the system is reset by itself when I start the ignition.

 

I've also had to follow one of the other threads here and disconnect and reconnect the SYNC fuse to get the USB port to work again.

 

Has anyone else seen this sort of behavior? Is this normal, or could I have a significant electrical problem that is just now emerging?

Link to comment
Share on other sites

i believed it had happened to me also. at first i thought my brother used my car and he was screwing around with the display, when it happened, cause when i turned on my car, my display was changed to enlighten mode, and i always have it on empower always, my fuel economy was at 22.2 l / 100km when it was at 5.3 l 100 km. and my trip meter has disappeared. than my brother tells me he didnt even use my car at all that day. but it was wierd

Link to comment
Share on other sites

i believed it had happened to me also. at first i thought my brother used my car and he was screwing around with the display, when it happened, cause when i turned on my car, my display was changed to enlighten mode, and i always have it on empower always, my fuel economy was at 22.2 l / 100km when it was at 5.3 l 100 km. and my trip meter has disappeared. than my brother tells me he didnt even use my car at all that day. but it was wierd

 

I should have done a search first. Look for the thread labeled "First Display Glitch." Several others have experienced this same problem; it's a software glitch. Presumably it affects nothing but the dashboard display, and the dealer will fix it if you complain. One wonders why it's not part of a more generic recall - or why they didn't instruct the dealers to perform this fix at the first 5000 mile checkup.

 

I wonder if they have a fix for that infernal USB problem. I really don't want to have to reset the system by taking the fuse out again.

Link to comment
Share on other sites

  • 2 weeks later...

I am having the same problem and I today left my car at the dealer for its 11700 mile checkup and I thought the system would be reset during the check -up. But tomarrow I'll call call the dealer and discuss the reset fix in TSB 10-15-5. This the second check I've put the fusion into the dealer for a check up, the first check was approximately 6000 miles and I had them do a software upgrade. However recently the same reset occured giving me an mixed and lower mpg and changed changed the empower gauge on the dashboard.

Edited by toolman1
Link to comment
Share on other sites

I've got about 7000 miles on my hybrid, and I have noticed that the system has reset itself a couple of times already. Normally, you're supposed to navigate through the menus and reset all of the stats that way, but I have noticed that the system is reset by itself when I start the ignition.

 

I've also had to follow one of the other threads here and disconnect and reconnect the SYNC fuse to get the USB port to work again.

 

Has anyone else seen this sort of behavior? Is this normal, or could I have a significant electrical problem that is just now emerging?

 

I also had this problem however it turned out to be a loose battery cable. Agood bump in the road would cause everything to reset. You may want to check this out.

 

Cheers,

Link to comment
Share on other sites

  • 3 months later...
  • 2 weeks later...

I have a Mercury Milan Hybrid. I had the Long Term Mileage reset problem happen to me. My dealer said there was a TSB about it. He installed the new software today. I do notice a difference. When you get your mileage report card at the end of the trip I now have fuel used displaying hundredths instead of tenths of a gallon.

 

Too soon to tell if there are other differences.

Link to comment
Share on other sites

I have a Mercury Milan Hybrid. I had the Long Term Mileage reset problem happen to me. My dealer said there was a TSB about it. He installed the new software today. I do notice a difference. When you get your mileage report card at the end of the trip I now have fuel used displaying hundredths instead of tenths of a gallon.

 

Too soon to tell if there are other differences.

 

I have had the reset, and so has my brother. Several people have referred to a TSB but no one has any details. When I reported the reset to my dealer, the TSB had not been created again.

 

Does anyone have details about this TSB? Is there a firmware upgrade? Did it come out after the "Brake software" upgrade? :eek5:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...