Jump to content

3.0 V6 Mileage


con_fusion
 Share

Recommended Posts

Didn't really see any threads on V6 mileage so what is everyone getting?

 

With the 2010 3.0 V6 FWD, I'm getting 23.5 mpg with about 1/2 City/Highway driving.

 

This seems to be a little better than the estimated combined mpg that was on my sticker (22).

Link to comment
Share on other sites

Didn't really see any threads on V6 mileage so what is everyone getting?

 

With the 2010 3.0 V6 FWD, I'm getting 23.5 mpg with about 1/2 City/Highway driving.

 

This seems to be a little better than the estimated combined mpg that was on my sticker (22).

 

2010 SEL AWD i drive about 75% hwy,live in rural area,average on computer says about 25.5,on the freeway at 72mph,can get 28mpg

Link to comment
Share on other sites

I am constantly getting about 27.5 combo driving, granted most of that is indeed highway and I can tell you I don't baby my car for mileage. Of course, thats the cars computer giving me that reading and only god knows how accuratre that is. Still, 27.5 is pretty good if you ask me, especially having all the power of the 2010 V6-3.0 as it does. Very happy with the engine performance and mileage. Some of that is due to the 6-speed tranny though, but as a package, it does rather well.

Link to comment
Share on other sites

About 23 driving half highway and city, and this has continuously been my mileage. Just highway, I've been getting 30 usually, but sometimes I drive the highway very late, set the cruise control at 55mph (speed limit on the Garden State Parkway) drive in the right lane, and do 42mpg. That's usually when I have unlimited time and want to save gas.

Edited by Oldguy16
Link to comment
Share on other sites

I'm getting 25.7mgp now with abbout 75%hwy driving. Recently found that car runs a lot better with 89 octane fuel instead of 87.

Just from experience, I put nothing less than 91 in my fusion, it seems to run perfect on that. of course 91 is obviously more expensive but if you have the money, worth it.

Link to comment
Share on other sites

Just from experience, I put nothing less than 91 in my fusion, it seems to run perfect on that. of course 91 is obviously more expensive but if you have the money, worth it.

 

In what way?

 

The OM says the opposite

 

Fuel quality

If you are experiencing starting, rough idle or hesitation driveability

problems during a cold start, try a different brand of “Regular” unleaded

gasoline. Premium unleaded gasoline is not recommended for vehicles

designed to use “Regular” unleaded gasoline because it may cause these

problems to become more pronounced. If the problems persist, see your

authorized dealer.

Link to comment
Share on other sites

The fusion runs on minimum 87 octane, and can take up to Ethanol, I'm pretty sure it can handle 91. When I tried 87, it was rough idle, as you stated, and didn't seem to accelerate as smoothly, put 91 in, car drives wonderfully. Idle has been smooth, as well as acceleration. My dad does the same for his sport, he also though regular just didn't run well.

Link to comment
Share on other sites

The fusion runs on minimum 87 octane, and can take up to Ethanol, I'm pretty sure it can handle 91. When I tried 87, it was rough idle, as you stated, and didn't seem to accelerate as smoothly, put 91 in, car drives wonderfully. Idle has been smooth, as well as acceleration. My dad does the same for his sport, he also though regular just didn't run well.

 

If it runs bad on 87 then somethings wrong, either with the engine or the fuel.

Link to comment
Share on other sites

If it runs bad on 87 then somethings wrong, either with the engine or the fuel.

In all technicality it runs fine, I just feel it runs better on 91, smoother, all my other cars do the same, new or old. I don't mean it's not driveable, I just feel it runs better on 91, same with the sport. For instance instead of not feeling idle at all, on regular fuel, once in a while I'd feel the engine. I think my post turned out to be a bit more exaggerated than intended. The fusion can of course run on 87, and is meant to, Ford even designed the ecoboost to run on 87, I just feel mine runs best on 91.

Link to comment
Share on other sites

  • 2 weeks later...

Didn't really see any threads on V6 mileage so what is everyone getting?

 

With the 2010 3.0 V6 FWD, I'm getting 23.5 mpg with about 1/2 City/Highway driving.

 

This seems to be a little better than the estimated combined mpg that was on my sticker (22).

 

 

As of yesterday, my 2010 3.0 V6 AWD (according to the computer) got 28 mpg at 75 mph and 29 mph at 68mpg. I'm happy with that.

Link to comment
Share on other sites

  • 1 month later...

I also run 93 octane, only have the choices of 87,89 and 93 here in south Texas.

 

On my old vehicle I discovered that higher octane helped the car's performance.

 

So when I got my 07 Fusion SE V6, the first gas I put was 93 and have not changed since.

 

Still runs like new @ 124K - My next dues are tranny flush, brake check & tires after that.

 

And I also have always used FULL SYNTHETIC OIL and premium oil filter for all my oil changes every 4-5K miles.

 

MPG as of now is 24.5 with combined hwy/city driving.

Link to comment
Share on other sites

  • 4 weeks later...

I also run 93 octane, only have the choices of 87,89 and 93 here in south Texas.

 

On my old vehicle I discovered that higher octane helped the car's performance.

 

So when I got my 07 Fusion SE V6, the first gas I put was 93 and have not changed since.

 

Still runs like new @ 124K - My next dues are tranny flush, brake check & tires after that.

 

And I also have always used FULL SYNTHETIC OIL and premium oil filter for all my oil changes every 4-5K miles.

 

MPG as of now is 24.5 with combined hwy/city driving.

 

 

Can I ask you where you take that tranny flush maintenance from ? I do not remember seeing this in the maintenance schedule

 

tnx!

Link to comment
Share on other sites

Can I ask you where you take that tranny flush maintenance from ? I do not remember seeing this in the maintenance schedule

 

tnx!

 

Hi P00r. :D Ford's Maintenance Guide recommends changing the automatic transmission fluid in the Fusion/Milan/MKZ at 150,000 miles for "Normal Service" vehicles and 30,000 miles for "Severe Service" vehicles.

 

You can find this information in the Ford Scheduled Maintenance Guide you were given when you purchased your vehicle, (if you purchased new). In addition, the descriptions of what comprises "Normal" or "Severe Service" vehicles are also located in the Maintenance Guide.

 

Of course, that is Ford's "recommendation". If you are more comfortable performing scheduled maintenance sooner than Ford recommends, it certainly will not hurt and that is up to you. As long as you don't change later, you are good.

 

If you purchased your vehicle used or can not find your copy, you can download he PDF version here: LINK: Ford Owner Guides

 

Hope this information helps.

 

Good luck. :beerchug:

Link to comment
Share on other sites

Hi P00r. :D Ford's Maintenance Guide recommends changing the automatic transmission fluid in the Fusion/Milan/MKZ at 150,000 miles for "Normal Service" vehicles and 30,000 miles for "Severe Service" vehicles.

 

You can find this information in the Ford Scheduled Maintenance Guide you were given when you purchased your vehicle, (if you purchased new). In addition, the descriptions of what comprises "Normal" or "Severe Service" vehicles are also located in the Maintenance Guide.

 

Of course, that is Ford's "recommendation". If you are more comfortable performing scheduled maintenance sooner than Ford recommends, it certainly will not hurt and that is up to you. As long as you don't change later, you are good.

 

If you purchased your vehicle used or can not find your copy, you can download he PDF version here: LINK: Ford Owner Guides

 

Hope this information helps.

 

Good luck. :beerchug:

 

Thanks BBF for the quickreply and for the link!

 

I had the manual but somehow I did not notice this maintenance point!

I will highlight it!

 

Happy New-Year!

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

New to the forum...had my 08 Fusion SEL 3.0 since November, and I can't seem to get anything better than 24mpg. I do about 85% highway driving and I can say I am disappointed in the fuel economy. I don't get on it ever, so 24 isn't that good IMO. My 95 Infiniti j30 with a 3.0 V6 with 150k miles would run about 3,000 rpm at 70 mph and would do almost 25 mpg, the Fusion runs at a little over 2,000 rpm at 70, and I see about 23.5mpg as a max. I really hope it is just crappy winter gas. Other than that I love the car.

Winter gas and winter roads have a huge impact. I have noticed a considerable drop on the freeway when it is raining hard (Seattle) and the roads are very wet, thus increasing the rolling resistance. In the winter it is also much more likely for the car to start, even after a short park, in warm-up mode, which is not a MPG friendly mode. I see at least 28 MPG on both of mine at 65-70 MPH on semi flat, dry roads. A combined tank, typically 70/30 city/hywy usually results in 22.5 to 23.5 which I am happy with.

Link to comment
Share on other sites

  • 1 year later...
  • 1 month later...

I own a 2010 Ford Fusion SEL with the 3.0 V6 and I get roughly 29 MPG. I drive 72 miles daily to work (36 there 36 back) mostly highway miles. It takes me about 16 city miles to get to the interstate and then once I get close to work another 8 city. Considering the City to Highway miles i'm driving to and from work with the MPG I get I can't complain.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...