Jump to content

I just bought a 2011 Fusion from the auction and it came with Mykey only.


Frank
 Share

Recommended Posts

I just bought a 2011 Fusion from the auction and it came with MyKey only, and I don't know where can I get started.

 

Can I remove the "MyKey" settings out of the key that I have?

 

Also, I found on Amazon uncut / un-programmed keys for $40, would that work as an admin key instead going to the Ford dealership and get a key for $200.

 

Please help!!

Link to comment
Share on other sites

If you only have one key then you have to go to the dealer to get another one added and to clear the mykey functionality. Shop around and you should be able to get it done cheaper than $200.

 

So what are you saying there is no way I can get a key with out going through the deal?

Link to comment
Share on other sites

So what are you saying there is no way I can get a key with out going through the deal?

 

You can get a key and have it cut and it will open the door but in order for the key to actually start the vehicle it has to be programmed to the vehicle by the dealer because you only have ONE key right now.

 

If you had 2 active keys then you could program a 3rd key yourself. But since you only have one key it has to be done by the dealer. The reason is security - otherwise a valet could take your key and program a new one and you'd never know it. Requiring 2 keys to make a 3rd prevents that.

Link to comment
Share on other sites

You can get a key and have it cut and it will open the door but in order for the key to actually start the vehicle it has to be programmed to the vehicle by the dealer because you only have ONE key right now.

 

If you had 2 active keys then you could program a 3rd key yourself. But since you only have one key it has to be done by the dealer. The reason is security - otherwise a valet could take your key and program a new one and you'd never know it. Requiring 2 keys to make a 3rd prevents that.

 

Owner's Guide:

 

Programming spare keys

 

You can program your own integrated keyhead transmitters or standard

SecuriLock coded keys to your vehicle. This procedure will program

both the engine immobilizer key code and the remote entry transmitter

portion of the IKT to your vehicle. Note: A maximum of eight coded

keys can be programmed to your vehicle; only four of these eight can be

IKTs with remote entry functionality.

Tips:

• Only use integrated keyhead transmitters (IKTs) or standard

SecuriLock keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

 

Link to comment
Share on other sites

Some locksmiths have the ability to add keys when there is only one key.

 

I have had "My Key" with some rentals. Usually it is only one of two keys. My Key limits top speed to 80 MPH. When you approach 80 MPH, there is a dash display warning you that you are approaching the speed limiter. That may be desirable if there are teenagers in the family, but otherwise it is a real pain.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...