jbr07002 Posted February 24, 2013 Share Posted February 24, 2013 Three weeks ago I bought a 2009 Fusion SE, the moon roof worked fine when I tried it at the dealership. It is literally three weeks later, and this is only the second time I've tried to use the moon roof and it doesn't work. You can see that one side of it engages more than the other side which seems to get locked up by something. Anyone have any similar problems or any advice? 0 Quote Link to comment Share on other sites More sharing options...
ctrcbob Posted February 24, 2013 Share Posted February 24, 2013 No advice, but I'll tell you what happened to me with my SHO. I use the moonroof often, both using the "tilt" and the "slide back". One day, after using the "slide back", after closing the roof back to its normal position, I could not slide the manual inside roof shade back into place. It would stop about midway. After trying many things, like opening and closing the moonroof, and the shade still not closing past the half way mark, I pushed the shade forward with a lot of force, and bingo, the slide went into place. Then noticed something strange. When I open and close the manual shade, as long as I don't open the moonroof to the "slide back" position, the shade operates normal, even if I open the moonroof to the tilt position. However, when I open the moonroof to the "slide back" position, then close it, the manual shade is very hard to close, only the first time I close it. (after that, it closes easy). Don't know what is wrong, but no way am I going to have a tech take apart the inside roofing material, to check and fix it as the cost is more than the value, and it only takes me a little more effort to close that inside manual shade that first time. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.